MiSTer FPGA Forum

misterious

Given the increasing challenges associated with consuming content on Twitter, I believe it's time for other options. I've noticed a significant absence of references to MisterFPGA on Threads. So I invite the entire community to create and share their Threads usernames in this discussion. It's important to note that this isn't about categorizing co...

misterious

the fact is I've followed the recommended setup (plus my stuff) in MiSTer.ini so I have

[Minimig]
video_mode_ntsc=8
video_mode_pal=9
vsync_adjust=2
video_info=0
vrr_mode=2
custom_aspect_ratio_1=40:27

I've tried different video_mode(s) but nothing changes so I don't really know what's going on other than is something monitor related

thanks

misterious

I'm not super familiar with this game but moved around a few screens and never saw a desync. Using a C1 with freesync and vsync_adjust=2 @ 1080p. when the screen changes, the transition is stable like in the video below https://invidious.snopyta.org/watch?v=4RZhynxUzg0 or it flickers? I tried but nothing changed, I ended up inserting video_info=0 ...

misterious

Optiroc wrote: ↑Mon Mar 13, 2023 4:14 pm
What vsync_adjust setting do you use?

as I said vsync_adjust=1 with forced freesync , I've a 2k dell monitor and the setting allows a super smooth scrolling

I'm super satisfied with the core, it's just this specific game that is very annoying buy playable after all

misterious

Chris23235 wrote: ↑Mon Mar 13, 2023 10:24 am
With modern TFT-Displays these resyncs take some time. The MiSTer showing the new resolution is the intended behavior.

makes sense, thanks

misterious

I just installed megaAGS and started playing this game. The problem is every time the scene changes, the screen flickers and the monitor resyncs with the amiga screen that resizes and the resolution gets displayed by mister . I'm using a freesync monitor (forced freesync option with monitor that matches core freq) Is this the normal behaviour for a...

misterious

Exciting Hour was one of the games I spent hours and hours playing , do you think might be feasible one day? The HW does not seem too complicated (but I'm not an expert)

Main CPU : MOS Technology M6502 (@ 1.5 Mhz)
Sound CPU : MOS Technology M6502 (@ 1.2 Mhz)
Sound Chips : (2x) General Instrument AY8910 (@ 1.5 Mhz), DAC

regards

misterious

is it safe to do an hard reset with the mounted hd without umounting it first?

misterious

I converted all my iso into chd using MacOs and they work just fine .. you can use brew, install rom-tools and then use chdman , I also managed to use img files without problems

misterious

not sure what I did (twearking correctly the analog support in the menu?) but tomb raider III works as Chris23235 mentioned , even if the psx pad configuration didn't ask me to setup the 2 sticks

keep on testing this wonderful core !

misterious

I tried to d/l spyro or tomb raider but using the old digital pad without 2 joysticks is really a pain, I read around (never owned a psx) that the playstation supports a ps2 analog stile gamepad and spyro and tomb raider are supported but despite setting the option in the menu nothing really happens. Is it just the emulator not ready or it's me mis...

misterious

Is anybody here familiar with why the Amiga core would return an error saying "Missing directory Amiga" when I try to pick a Kickstart ROM? I've tried putting my ROMs in /media/fat/Amiga and /media/fat/Games/Amiga (both of which I've seen other people suggest), but neither seems to work for me. I'd rather not drop a kick.rom file in the ...

misterious

thanks, I installed the unstable branch and mass imported all the games!

misterious

Swainy wrote: ↑Fri Jun 25, 2021 8:20 pm How do I do this? Sorry, still fairly new to the MiSTer.

just ssh into mister
create the mountpoint

Code: Select all

mkdir /mnt/hd

then type

Code: Select all

mount /dev/sda2 /mnt/hd

misterious

did you mount the fs from MiSTer?

mount /dev/yourdevice /mnt/mountpoint

aside from that , the first (cheap) HD that I tried was consuming too much power and kept stopping, tried another one and worked like a charm

misterious

the same manner as bbond007 has managed to get Doom, Basilisk II and ScummVM running. Since ScummVM runs Frotz already this seems pointless. https://wiki.scummvm.org/index.php?title=Glk/ZCode Thank you, I was not aware of that. I'll test it and if it does everything then I'll retract this, no point in doing the all the work if ScummVM already does...

misterious

Well this sucks royally. My MiSTer is connected to a 4-way HDMI switch, which then plugs into my AVR, which then connects to my TV. When I turn on the MiSTer with the Lindy adapter connected right into it, my HDMI switch lights up on that port indicating that it's live, but nothing seems to actually go through as my TV says there's no signal. I've...

misterious

*UPDATE*

the cable issue is fixed, basically I just replaced the usb-c cable that comes with the SN30-PRO with another USBA-USBC I bought in a chinese shop to charge a mobile phone :X I couldn't believe the gamepad worked flawlessly, the bt dongle still gets stuck but ok...

misterious

>Got an 8bit do SF30 pro with an 8bit do bluetooth module (got them to pair) but the Mister doesnt recognize it just upgrade the firmware to the latest version (both brick and sf30) , then insert the brick , push Y+start on the pad (so that the 4 lights slide) that's it the only thing, if you hard reset the MiSTer you have to unplug and plug the br...

misterious

>What other devices are in your setup? I usually use a usb2 hub for keyboard/mouse connected to the standard powered 7 ports usb hub (just to avoid plugging 2 devices) , the 8bitdo wireless adapter (the red brick) and the sn30 pro (latest firmware) , nothing fancy, most of the time I don't even use mouse/keyboard . Initially I had a basic not power...

misterious

nop, it doesn't work for me, I tried all the combinations but after an hard reset the joypad is always stuck, I also tried with the usbc cable but that simply doesn't work, the leds keep sliding back and forth forever. The only viable solution for me are soft resets (changing cores on the fly) or simply using a ps4 joypad (but I usually cannot) :/

misterious

I've the exact same problem with the 8bitdo SN30-PRO + the usb hub but I never used it with anything else than MiSTer so I was thinking it simply wasn't working with the usbc cable (!) also I've problems with wireless adapter (the red brick) , It works fine till an hard reset, then you've to unplug it , plug it and reissue the bluetooth search (pre...

MiSTer FPGA Forum

Search found 22 matches

Re: MiSTerFPGA community on Twitter alternatives, share your Username here!

Re: Chrono Quest Monitor Resyncs Changing Screen

Re: Chrono Quest Monitor Resyncs Changing Screen

Re: Chrono Quest Monitor Resyncs Changing Screen

Re: Chrono Quest Monitor Resyncs Changing Screen

Chrono Quest Monitor Resyncs Changing Screen

Request: Exciting Hour

Re: PSX off external hard drive

Re: ISO support has gone - for good?

Re: does psx support analog pads?

does psx support analog pads?

Re: Missing directory Amiga

Re: Frotz/Z-Machine support

Re: USB Hard Drive - Can’t get it working

Re: USB Hard Drive - Can’t get it working

Re: Frotz/Z-Machine support

Re: HDMI CEC and the MiSTer.

Re: USB Hub 2.1 incompatible with 8-bitdo M30 bluetooth when wired?

Re: Various things to overcome.

Re: USB Hub 2.1 incompatible with 8-bitdo M30 bluetooth when wired?

Re: USB Hub 2.1 incompatible with 8-bitdo M30 bluetooth when wired?

Re: USB Hub 2.1 incompatible with 8-bitdo M30 bluetooth when wired?