MiSTer FPGA Forum

Maybe I can for example remove the sample rate fix but leave the copy bit and see if that makes a difference. @S0urceror I did this examination on the posts above with Atohmdiy's help :) Here is the result. NES_A.rbf: bit 2 (Copy bit) removed -> Have sound NES_B.rbf: bit 15 (LX bit) removed -> No sound NES_C.rbf: bit 25 (48kHz) removed -> No sound...

Atohmdiy wrote: ↑Mon Feb 08, 2021 5:52 pm Thank you for the help. I have sound only with NES_A core.

@Atohmdiy

Thank you for the feedback.
Then how about this build (NES_D)?

P.S.
Could you let me know what toslink receiver device are you using?

Not sure any dev will look to this problem here, maybe i should open an issue in github ? @Atohmdiy I think I could help you but I don't have IO board and spdif environment for testing. Moreover it seems to be a compatibility issue specific to receiver device. So I need your help. The change I mentioned above can be divided into 3 parts. I made 3 ...

There was a framework update related to spdif output between the versions @Atohmdiy mentioned.
It may be affecting.

viewtopic.php?f=28&t=1803

Arcade Breakout:
- Support for paddle/spinner button as serve button (by Sorgelig)
Note: mra needs to be updated as well

- Adjust hblank (by Sorgelig)

Arcade Breakout:
- Spinner support
- Reset support
- Separate input invert option
- Fix initial paddle position

Please see attached my MiSter.ini. Please try attached MiSTer.ini I fixed a little and it worked on my MiSTer (but with a mouse) The problem is that the place where the lines are added. In your MiSTer.ini, the lines are added in [SNES] section. They should be in [MiSTer] section. If the direction and/or speed aren't what you wanted, please change ...

Alkadian wrote: ↑Sun Dec 20, 2020 10:40 am Please let me know if I can test/try anything you might think of when you get a chance to look at it again. Many thanks!!

Could you attach your MiSTer.ini?
I’ll try it on my MiSTer.

And if you have a usb mouse, please try it instead of the spinner.
Of couse set vid and pid in ini both 0xFFFF if you don’t know.

I suspect that the SpinTrak USB Arcade Spinner adaptor behaves as mouse input because even with your beta version the spinner doesn't work. I have selected the Spinner option under the control settings and I can confirm that I have got the latest Mister firmware and that I have added the following two lines: spinner_vid spinner_pid within my Miste...

Just to clarify I have got a SpinTrak USB Arcade Spinner which is automatically detected by the Arkanoid core. Would you please let me know how to enable MrSpinner for your core? Sorry If I am missing the obvious! Thanks a lot! Thanks for clarifying. Very helpful :D I thought you're using mr.Spinner firmware by Sorgelig but it seems to be differen...

If there is a demand for it, I will try to implement it. That's fantastic! Many thanks for looking at it! I will buy Arduino Micro + rotary encoder for exact testing :) That's cool! :mrgreen: I've tried Spinner implementation and almost worked. But I have one question. What do you think is the advantage over the paddle emulation by mr.spinner? I j...

Would you please let me know if you are planning to implement the support for a spinner? If there is a demand for it, I will try to implement it. But it will take a bit of time, since I don't have a mr.spinner for testing right now. Paddle input was tested with mbed lpc1768(+ potentiometer) which behaves as mr.spinner with only paddle input(+ fals...

Thanks for your reply bellwood420. I just wanted to pick your brain and see why you joined MiSTer. I can't wait to see your core show up in the official repo. Forgive me for my ignorance since I have no development ability, but If you do decide to develop additional logic cores sometime in the future, an easier option to get your feet wet while kn...

Atari Breakout
- new core released

To KremlingKuthroat19, I'm glad to hear that :) I am sorry that I may not follow your expectations, but I'll try to answer your question. Actually, I have to say, I'm not interested in because I'm satisfied for now. Of course, it would be great to port other early logic cores if I had infinite time and vitality. But it's not my priority. The detail...

To alanswx,

I have added mra with reference to wiki information(I'm sorry. I didn't notice it) and moved DIP-SW settings from status.
Now we can lauch breakout from mra.

Also added "Jn" line in CONF_STR for default assignment as you mentioned.

Thanks for your suggestions for improvement.

Dear alanswx,

Thank you very much for PM, but I am unable to reply.
The forum system says I am not authorized to use composing PM feature because I have just registered.
Can I reply here?

Best regards,
bellwood420

Hello, I have developed a new core for MiSTer. It is Arcade Breakout (Atari 1976) and I uploaded it to my repository in github (link below). https://github.com/bellwood420/Arcade-Breakout_MiSTer Just like Arcade Pong core, Arcade Breakout circuit is made up of asynchronous discrete logic circuits. I achieved stability on FPGA by implementing them s...