MiSTer FPGA Forum

pbsk8

Ok, not sure about your DAC (it should work...) but how about connecting audio directly from the I/O board mini jack to external speakers/headphone/etc? I mean, it really should be fine on the new-design I/O boards. The lower quality sound (which wasn't all that bad to start with) and subsequent DAC solutions were a thing with the 6.1 boards and I...

pbsk8

only using the turbo core without patches isn't enough?

pbsk8

CBFDforN64CorePatchNTSCUncensoredv2

this uncensored is prototype or a final retail?

pbsk8

I hope this can be done with jet force gemini as well.

pbsk8

Typical ESD damage, it commonly happens to the Mister when fiddling with it when it’s not in a case, like here. Nothing to do about it, just throw away and get a new one. And get a case, too, a metal one. That’s the only protection against this sort of thing, this makes the electrostatic discharge go to ground instead of directly into sensitive ch...

pbsk8

Waiting for the clone now.

pbsk8

Given the rust on the switches and the rest of it looking pretty dirty, I wouldn't be surprised if a component just failed on its own. Do you live near the ocean? I am wondering what is causing the rust build up. Yes, I live near the ocean, south america, quite tropical here all year round. Honestly I still can't accept like how this happened. 3 y...

pbsk8

That's great advice, getting the metal case. It will also protect the electronics from the elements and keep them clean. It is interesting that inserting a toslink cable caused this because it isn't metal, but my guess is you were statically charged when you picked up your MiSTer. You should get a ground strap and wear that when working on your Mi...

pbsk8

Typical ESD damage, it commonly happens to the Mister when fiddling with it when it’s not in a case, like here. Nothing to do about it, just throw away and get a new one. And get a case, too, a metal one. That’s the only protection against this sort of thing, this makes the electrostatic discharge go to ground instead of directly into sensitive ch...

pbsk8

I still think there is a short (or defective part) causing the power supply to flash. Try thoroughly cleaning the board with isopropyl alcohol. It might not help, but it can't hurt. Worst case, it will be very clean when you throw it away. I had cleaned it with isopropyl alcohol before trying with different sd and fresh mr fusion install. I would ...

pbsk8

what's odd is the green led blinking on power supply,

When I unplug the cable from the de10 nano the led green stays active.

pbsk8

No the DE10 has no image on it. It needs to load it from the Sd card. Without an image its just a paperweight. So should I use for example another sd card (8gb I have one spare) and flash it with mr fusion? Yes a new fresh SD card with a Mr Fusion Install. Only use the DE10 at first no extension boards. If that works you can add the expansion boar...

pbsk8

Corrupted micro sd for sure. But wouldn't at least the de10 nano power on when connected to power supply and get some image via hdmi also plugged? https://www.youtube.com/shorts/rTn9Lxqshx0 https://www.youtube.com/shorts/EpQaVTmlNRg I will find some time later today to get a multimeter and check this board (it has been ages I used a multimeter) No...

pbsk8

Corrupted micro sd for sure. But wouldn't at least the de10 nano power on when connected to power supply and get some image via hdmi also plugged? https://www.youtube.com/shorts/rTn9Lxqshx0 https://www.youtube.com/shorts/EpQaVTmlNRg I will find some time later today to get a multimeter and check this board (it has been ages I used a multimeter)

pbsk8

impossible to say over a distance but mine had a power button that started depressing after a while , after i tried several things and even bought a new psu (which was desperate b/c it worked before so theres no reason it would suddenly need more power for the same setup) turns out i had to clamp the button (since i dont have a soldering kit and i...

pbsk8

It is like this: https://www.youtube.com/shorts/rTn9Lxqshx0 When I unplug both cables from usb hub and de10nano the green led on power supply keeps on without blinking. I forgot one important thing, and this might fix everything. Make sure the microSD card is properly inserted. I don't know how many times I accidentally ejected it and everything a...

pbsk8

any way I can check if the mister io, ram and usb hub are not dead as well? like using a multimeter and such? You can remove the I/O board, RAM and USB hub and see if the MiSTer powers on. Perhaps the RAM or I/O board went bad. Also, the USB hub can function on its own, so you can test that while it is not connected to anything if you have the rig...

pbsk8

I tested the original power supply and still nothing. It was odd because this happened coincidentally after I connected the toslink from io board directly into the dac, before I always used from mister io directly to the edifier speakers and this time I tried different because I wanted to try the headphones. any way I can check if the mister io, ra...

pbsk8

So I was playing it for an hour like all times previously, only difference was I had connected a toslink cable from the mister io board directly to a sony dac (dp-1000 that I use as well with ps2/ps3). All working fine, But then it turned off and there is only a blinking red led on the usb hub. This is the type of connector I use, I have the usb la...

pbsk8

new version released today on discord.

pbsk8

KennyL wrote: ↑Wed Jun 12, 2024 3:03 am
2.4/2.5 rams problems seems to be fixed with this build posted by srg. It's working great for my 2.5 ram.

is this for single ram?

pbsk8

Has anyone else had any issues with their DuaSense of the SNES core? When I try to plays Mega Man X for example, I can only have one button activated, meaning I can't have my buster charged and jump/ dash. It's very annoying. I don't have that issue with my Switch Pro controller or Dualshock 4 but the DualSense is my favorite controller and would ...

pbsk8

final fight is cps1.

pbsk8

you can download from archive org a batch with already converted files and play right away on mister core.

pbsk8

i dont have a snac, since guncon 2 uses usb, the psx games are compatible with it?

pbsk8

wow

new version?! nice! I will try castlevania right away and see if those small glitches were fixed.

what's the difference in FDC version?

pbsk8

not even released

I am already waiting for the clone.

pbsk8

I use only one hi-saturn region free, never had any problems

pbsk8

delete the psx rbf and download it again.

pbsk8

rhester72 wrote: ↑Sat Apr 13, 2024 10:46 pm
I'm pretty sure if you put an entry in names.txt that is just "<core>:" without quotes (i.e. aliasing the core name to nothing), it has the effect of hiding it in the menu.

but then on next updateall they all return. Favorites script wouldn't be the solution then?

MiSTer FPGA Forum

Search found 288 matches

Re: Trouble getting DAC to work on Taki's MiSTer Pi

Re: Experiences with Patcher64+ games on MiSTer

Re: N64 game patches to increase N64 Core compatibility

Re: Patches to make Conker's Bad Fur Day and Jet Force Gemini work in the N64 core on MiSTer

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: MiSTer Won't Turn On Anymore Dead DE10 Nano?

MiSTer Won't Turn On Anymore Dead DE10 Nano?

Re: Sega Saturn Core in Development

Re: Sega Saturn Core in Development

Re: PS5 DualSense Controller Issues

Re: Final Fight CPS2 will not work

Re: Conversion from 2HD to HDF?

Re: Does the Guncon 1 Work with PS1/Other Cores?

Re: X68000 Beta - Updates and Releases

Re: MARS is now...MPRS?

Re: Saturn Core Not Working

Re: PSX Core Stopped Working

Re: Is it possible to hide cores without deleting them?