MiSTer FPGA Forum

lu_source

psakhis wrote: ↑Sat Feb 03, 2024 10:18 am
For retroarch hardware rendered core (i only tested glcore), i recommend test build with lz4 activated.

For flycast, is needed disable threaded renderer.

Thanks! Disabling threaded renderer works, so Dreamcast boots, but Gamecube still doesnt boot.

lu_source

KennyL wrote: ↑Sat Feb 03, 2024 3:21 am
Edit: Oh wait are you the Lu of Lu's Retro Source??

Yes that's me

lu_source

This is an amazing project and love how low latency it is. I'm now trying out RetroArch and can successfully run games, however, consoles like the DC, PS2 & Gamecube are not working for me. I saw that there was an update to support hardware rendered cores. The cores run fine on the PC if I specify a retroarch.cfg file without the necessary Groo...

lu_source

This is some great work. I'll definitely be testing this rbf.

lu_source

Great to see he's ok. I'm assuming the changes have to do with the Saturns CD Block?

lu_source

I have the Keychron K4 and it works out of the box for me in AO486. Been using it for over a year with no issues. But recently, I am having problems syncing it over bluetooth. I don't know if it has to do with a new bluetooth adapter I bought or if it was a MiSTer update. I need to do more testing.

lu_source

Hello, I tried to get a guncon 2 working with the psx core. Problem is, i have a controller and the guncon2 connected. The controller is always assigned to player 1, and guncon to player 2. In the OSD i can disable the controller but guncon is still in player 2. So i suppose the only way to have this to work is to unplug the controller every time ...

lu_source

Hi guys, I'm new here and wanted to ask if anybody managed to run Falcon 3.0 without crashing. I've seen flynnsbit video in which he tested it, but the problem is that he went only as far as reaching the main menu, which works just fine for me as well. The problem happens when entering flight: the program freezes after 10 seconds or so in flight, ...

lu_source

I have a driving wheel, that I'm trying to get working with AO486. However, I'm having issues with the accelerate/break pedals (which are seen as the Z axis in windows). What axis does AO486 expect the pedals to be? Are there specific wheel types that AO486 expects?

lu_source

If you already have a regular MT32Pi hat you can also use a DB9 to USB adapter to connect it externally.

This is the adapter that I use for my Ironcald Plus board
https://www.antoniovillena.es/store/pro ... 3-adapter/

lu_source

Here's a guide on how to build the GunCon3 emitters in case you dont have those anymore.

lu_source

This is a great idea! So this uses a different FPGA board than the DE10 Nano?

lu_source

You will want to check out Mr Retro Wolf's YouTube videos. He has a tutorial series that teaches you how to create an arcade core.

https://www.youtube.com/channel/UCyyulM ... LiyJw3GMSg

lu_source

I prefer the GunCon 2, but I only have a CRT with composite. However, there are some rare times that I actually want to use an original NES zapper, so I pull out my SNAC setup for that. If I had to choose between just having one over the other, I would take the GunCon 2. The convenience wins. Since you already have several lightguns you can always ...

lu_source

Thanks! I'll try this out!

lu_source

Does this MIDI support allow for a keyboard to work with the Miracle Piano ROM? I can get my keyboard to work with the NSF player, but it does not work when I try to use it with Miracle Piano ROM.

lu_source

I'm really looking forward to this core!

lu_source

An excellent core to add to MiSTer! It's a computer with really impressive graphics and sound. Always wanted to use it.

lu_source

Can any damage happed to the CRT when S-Video is not being output. For example, when I'm not in any of the YC cores and navigating the MiSTer menu's I get a black and white picture on my CRT. Will there be any side effects?

lu_source

This is great! I'm waiting for some adapters to arrive so I can try this out.

lu_source

Hi, that's my video so I will be able to answer some questions because I was also faced with the same questions you have. While I do not have any inside knowledge, Antonio Villena has answered some of my questions, but I'm mostly doing a lot of testing. I'm working on a full video regarding regular SNAC and ENCC. 1) I don't think the official distr...

lu_source

In case anyone else is wondering, I recieved a response from the developer of mt32-pi and he confirmed my thoughts on why it doesn't work.

https://github.com/dwhinham/mt32-pi/discussions/196

lu_source

I'm easily able to use mt32-pi from my PC to the Pi. I can also setup my AO486 to use Munt32 on my PC. However, when trying to use mt32-pi over the network with AO486 it doesnt work. Is it because mt32pi needs rtpmidi and MiSTer uses midilink instead?

lu_source

I think I know what my problem is. This thread help me: https://misterfpga.org/viewtopic.php?t=1471 I need to send a 480i signal but the thread above mentioned that the scaler doesnt support 480i. I can get 240p signals to work but they are way too low res to make ao486 usable on my monitor. I'll just unplug the composite cable if I want to use ao...

lu_source

I think I know what my problem is. This thread help me: https://misterfpga.org/viewtopic.php?t=1471 I need to send a 480i signal but the thread above mentioned that the scaler doesnt support 480i. I can get 240p signals to work but they are way too low res to make ao486 usable on my monitor. I'll just unplug the composite cable if I want to use ao4...

lu_source

I found another thread that might be relevant here. It seems to call it "underscanning" what might have worked there was: "Instead of vga_scaler=1, you can also try vscale_mode=1 vga_scaler=1 gave me big black lines on most resolutions. with vscale_mode=1 all resolutions seem fine." https://misterfpga.org/viewtopic.php?f=13&...

lu_source

Out of interest, why do you want to disable the analogue? Because the output to analog on the MiSTer to MY CRT is all garbled. I tried the timings on this thread but they they are either way too low res and makes text hard to read on both thourgh the CRT and HDMI or I experience the same garbled screen. I'm afraid I will cause damage to my CRT by ...

lu_source

Is it possible to disable the analog output over the IO board. I have my MiSTer FPGA connected to both a CRT and an HDMI monitor. When I run the ao486 core, I would like the output to be sent to only the HDMI port and disable the analog port altogether. Any help would be appreciated. you have to use the scaler when using ao486. This doesn't help i...

lu_source

Is it possible to disable the analog output over the IO board.

I have my MiSTer FPGA connected to both a CRT and an HDMI monitor. When I run the ao486 core, I would like the output to be sent to only the HDMI port and disable the analog port altogether.

Any help would be appreciated.

MiSTer FPGA Forum

Search found 29 matches

Re: Groovy_MiSTer Core

Re: Groovy_MiSTer Core

Re: Groovy_MiSTer Core

Re: Newer ao486_tool available ? / cpu compatibility

Re: Sega Saturn Core in Development

Re: Keychron Keyboard Function Keys

Re: Guncon 2 Player Assignement Problem

Re: eXoFlynn Top 300 DOS Pack Updates and Support

How Is the Driving Wheel Support Mapped

Re: d3fmod Ironclad Question

Have a GunCon 3 With No Emitters? Well You Can Build Your Own. Here’s How

Re: MiSTer Multisystem Handheld Prototype 'Handy'

Re: How do you re-create a video console?

Re: General thoughts on GunCon2 vs SNAC with original light gun

Re: MIDI NES

Re: MIDI NES

Re: Next186 MiSTer Core Progress

Re: Apple IIGS MiSTer Core Progress

Re: Another RGB to S-Video / Composite Adapter

Re: S-Video and Composite Over Component Output! (Custom Cores)

Re: ENCC/SNAC8 Questions

Re: Is it possible to use mt32pi over the network?

Is it possible to use mt32pi over the network?

Re: ao486 Config for a Plain Old CRT TV

Re: ao486 Config for a Plain Old CRT TV

Re: ao486 Config for a Plain Old CRT TV

Re: ao486 Config for a Plain Old CRT TV

Re: ao486 Config for a Plain Old CRT TV

Re: ao486 Config for a Plain Old CRT TV