MiSTer FPGA Forum

That’s what I thought. Maybe time to chase down a viewlix or something! Lol!

Question, are you doing this via HDMI or with a MisterCade or something similar? Doesn't seem to be working through my MisterCade.

Not sure it’ll be a lot of help, but mine synced in my blast with the default config on the mister using the analog io board.

I do have a 2931 in mine, which auto switches. If you have a 2930 you’ll need to set the dip switches for the monitor properly.

Here ya go!

https://www.microcenter.com/product/624 ... sb-spinner

I just tested mine, since I've been tinkering with a spinner too. Tron seems to support it just fine. I'm using the Atari branded USB button spinner that Microcenter sells. Must be something specific to your spinner or config.

Just following up on this for future searches. I spoke with Sorgelig earlier today. He noticed that it was using the Y axis instead of the X axis, so it would not be recognized. He added a new option to switch the axis. That got it working perfectly! New setting is: spinner_axis=1 It also took setting the spinner throttle setting to reverse the dir...

A little more debugging effort today. I hooked up to the serial uart on the DE-10 and captured this as I plugged in the spinner and rotated it: The file mouse0 was created. Close all devices. Open up to 30 input devices. make_unique(289B,0057,-1) make_unique(0E8F,3013,1) make_unique(16C0,05E1,1) make_unique(045E,02A1,1) opened 0( 0): /dev/input/mou...

No sure if it can help but you should have an InputTest core in Utility. Thanks for the reminder. I had tried that before, but had no luck. I just retested and found the same behavior as Arkanoid. The buttons register, but the spinner doesn’t. I’ve also validated that it shouldn’t be a power issue. My supply is capable of 12a, so should be more th...

Spent some more time on this, but nothing concrete figured out. I cleared out all of the configs related to Arkanoid, but no difference. I wired up a way to test the built in buttons on the spinner and using the test mode in Arkanoid, I found that the buttons are working fine. So it's something specific to the spinner/mouse part of this. I've tried...

Yes, using a basic mouse with 2 buttons works perfectly.

I'm breaking this away from another thread I've posted in the Arcade Cores section as I think it's an input issue and not a core issue. If the mods want to close down my other thread, that's fine. I picked up one of the Atari branded USB button spinners to use with the arcade cores that support spinners: https://www.microcenter.com/product/624264/a...

Tested with a new Arduino. No change at all, still using the PaddleTwoControllersUSB firmware. Completely unresponsive in Arkanoid and input test. Tested the Atari USB spinner under windows. Works great, shows up as a HID mouse. VID:PID = 32BE:1420. Added the Atari spinner vid and pid to the mister.ini to treat the mouse as a spinner as well as FFF...

Spent some more time on this, but still no luck. I am in the process of swapping out the Arduino as it was acting a little flaky when I was testing the pins, so I want to eliminate that. But in the meantime, I picked up one of these USB spinners with the hopes that it would work but out of the box, it didn't. https://www.microcenter.com/product/624...

I've been tinkering with an original Taito spinner I have left over from when I owned an Arkanoid, trying to make it work with the Mister. Running the Mr. Spinner firmware on an Arduino Pro Micro, I don't seem to get any activity from the spinner in Arkanoid, Tron, or the InputTest. In Arkanoid, I have set it to spinner mode, but no change. I've ve...