MiSTer FPGA Forum

Is this over HDMI or are you going out the IO board for audio? Just curious because that definitely doesn't sound good (no pun intended). hdmi.. here's a video https://photos.app.goo.gl/8Qh7kP9bjUDC2h4e8 So got another io board, and TIPI works again sigh.. the static came right back when I powered on with the pi attached, so I'm thinking something...

Yes that's fine I didn't change anything from the working configuration. It looks like maybe my IO board has gone bad. I'm also getting some interesting audio static in the menus and some cores.. I think I'll order another one and try that Is this over HDMI or are you going out the IO board for audio? Just curious because that definitely doesn't s...

Yes that's fine I didn't change anything from the working configuration. It looks like maybe my IO board has gone bad. I'm also getting some interesting audio static in the menus and some cores.. I think I'll order another one and try that Is this over HDMI or are you going out the IO board for audio? Just curious because that definitely doesn't s...

NML32 wrote: ↑Fri May 20, 2022 5:30 pm

arcadeshopper wrote: ↑Fri May 20, 2022 2:38 pm

NML32 wrote: ↑Tue May 17, 2022 11:53 pm

bummer, I tried full volume with my phone and tape deck.

You need an inline amplifier

Something like this?
https://www.amazon.com/dp/B07JQ7FXXL/

maybe.. I'd try something that doesn't do anything to the signal myself.. like the old radio shack amp. https://www.ebay.com/itm/144555294213

Yes nothing has changed from the working cores, no cores are working now. Tried a new sdcard image, no dice. going to have to troubleshoot the issues may be the adapter or io board. If the adapter checks out, verify the IO6 jumper (next to or around the User IO port) is set to I/O and not 3.3v. Yes that's fine I didn't change anything from the wor...

NML32 wrote: ↑Tue May 17, 2022 11:53 pm

arcadeshopper wrote: ↑Tue May 17, 2022 11:33 pm volume is too low if no data found

bummer, I tried full volume with my phone and tape deck.

You need an inline amplifier

volume is too low if no data found

Nothing has changed since February's release and mine is still working. Not sure what version of the core you had prior, but double check to see if the settings under the Hardware Menu have the Tipi enabled and make sure the tipi dsr is loaded under the Select TIPI DSR. Yes nothing has changed from the working cores, no cores are working now. Trie...

I've noticed lately my tipi stopped working with the mister, the only changes I've made is running update
is it just me? or did something change?

ok i got it working using a pi3b+ originally I was using a pizeroW I'm wondering if there are timing issues, TIPI adjusts itself based on the pi its running on..

seems to work for telnet, loading off tipi drive.. yay! I'll do more testing.. n

whats the wire on pin34 doing? I don't see it connected to the userport usb thing

hangs.. I'll compare wiring

tipi logs

no tipi log, in the daemon.log i can see it resetting the service when i reset the ti .. so that part works, just put the pi on a real tipi and it works fine..so something with my wiring perhaps.. that jumper is on io

After looking closely at the my spare board that I ordered, it does have #s on them. I've included the USB Pin# next to the name in the following list. RPI PIN USER PORT PIN USB Name USB Pin 31 6 TX+ (6) 33 2 TX- (5) 35 3 GND_D (7) 36 1 D- (2) 37 0 D+ (3) 38 4 RX+ (9) 39 - GND/SHIELD (NOT GND_D!!!) (10) 40 5 RX- (8) I've matched this, nothing when...

Yes it has both on the board I got
It matches the photo on Amazon
Not working first try is there any thing else I need to check on the mister?

Here is the core with Tipi support. It has the DSR baked in so you don't need to change anything with existing roms. It should work along with the Floppy Controller, but will disable floppy controller if you choose to use CRU 1100. Available options for Tipi CRU at the moment are 1000, 1100, 1200 and 1400. To download the TIPI image for your Raspb...

So, one of the many things I wanted to try out was interfacing with external devices through the User Port. At first I was thinking of maybe an RS-232 port but then I came across Tipi and looked interesting. I managed to get the TIPI firmware modified to work with Mister and the TI core and also connect the Raspberry Pi via the User Port. If there...

I went to load a new game yesterday that has a - in the filename, on my keyboard it looks like the -_ key is mapped to =+ and also the =+ is that and also the \| is that.. so all 3 keys map to =+ .. makes it very difficult to type a -

Greg

arcadeshopper wrote: ↑Mon Jul 19, 2021 2:43 pm Not working on my mister with 32meg sram. I just get a blank screen I can load roms etc. But nothing once I select them. Works fine with previous versions @Flandango

I purchased a larger sram, same issue.. blank scren. i can go into the menu and try and load a rom/grom but never get the title screen..

Not working on my mister with 32meg sram. I just get a blank screen I can load roms etc. But nothing once I select them. Works fine with previous versions @Flandango