MiSTer FPGA Forum

Yeah I do see what you're saying, but by the time we reached that page the fan is already fitted following the instructions on page 24, so I guess we weren't really looking at the fan picture by then. I think adding some text on page 24 saying the sticker should be facing out (air blowing out of the case) would be enough for tits like me that built...

While we're on the subject of feedback, and looking at your nice silver case above, my friend and I both found that the red reset button was permanently pushed down once we put the front/top part of the case on. We had to file the case it a little bit to make the hole a bit bigger before the feel of the switch under the button could be felt. In you...

Heh, I just came to the same conclusion. Looking at the manual pdf it doesn't really give enough info about this, it just says look at the picture and that fan is completely different colour and the cables come out differently. I went with my instinct to have air blowing in, since that's what you'd do on a PC case (positive pressure into the case s...

The 30mm fan was fitted with the label facing inwards (ie, blowing air towards the DE10). I could make a video and post it somewhere if that helps, I'm on signal (don't use whatsapp).

I'm going to try it again now.

My friend has confirmed the Phillips CM8833-II is stable using the VGA output to scart (with composite_sync=1 in .ini)

Thanks Rich That was exactly what I was starting to think as I read more about the differences between the multisystem scart and the VGA output (hence the sync on composite .ini setting being ignored on the Scart). My friend gets his ebay cable today but on the strength of what you've said I might just order mine now, it sounds like it would be goo...

Can someone verify that the VGA output on the Multisystem is the same as the one on the Mister IO board? We will be getting that alternative VGA to scart cable today and will be trying it on a Mister stack with IO board for comparison, but would also like to test it in the Multisystem itself. I've tried a few more arcade roms now and am seeing the ...

I would disagree that the 30mm fan is quiet, both of the systems we built yesterday with the new enclosure and parts have terrible noisy/whinny fans that change speed so the whine is even more noticeable, and that was on 3.3v. I put my Noctua 40mm in (with the back half of the lid off) and that one is so quiet even at 5v. Maybe 2 types of 30mm fans...

Hey all, first time post here. My friend and I both got our multisystems this week, and we both have a Phillips CM8833-Mk2 to use with it via Scart (and a scart to 9 pin D adaptor). We are both finding that some cores the screen is jumping constantly (essentially like a 1 pixel bounce of the image vertically a couple of times a second). The main on...