MiSTer FPGA Forum

offset

That is wild! One day would love to see it possible to use the mister cores to play on vector monitors (ie. asteroids, battlezone, etc).

offset

...it would be cool if the developers could create a build that you can just connect an ethernet cable from the misterfpga straight into a pcs ethernet port. Isn't this just an ethernet crossover cable? Not sure, but I think some ethernet adapters auto detect tx/rx (auto-mdi-x) being reversed. Just have to set different static ip addresses on both...

offset

midline_slippy wrote: ↑Wed Jan 31, 2024 7:56 pm
...
Pole Position
If this is released, I haven't noticed it... It runs on an old Namco? core?? "Prepare to Qualify"
...

Would love to see the source released from Adam's (One Circuit) work on this previously so someone else can continue the work
https://ppclone.blogspot.com/

offset

It's crazy how wide the range of sensitivity on these devices is! I thought 25%-200% was going to be enough :) I've sent @zeosstud a test version with 400%, if it works ok I can roll the same change back into MC no worries. Thanks Jimmy; there is actually an unofficial Centipede build with 800% that's been floating around this forum for a while, I...

offset

I use the optical link to bluetooth dac for my headphones. Slight delay compared to wired but I don't really notice - https://www.amazon.com/gp/product/B083LVX89D/

offset

No issues pulling up the map and no audio issues. My bin/cue files match your md5sums. Complete mister build from ultimatemister.com w/ digital i/o board and 2 x 128 SDRAM (2.9).

saturn core 23.10.18 and mister build 240110 (this may be an unstable build), OS v231108

Audio is run through the optical toslink on the digital i/o board.

offset

I was in a similar situation with needing larger and larger sdcards, so I just put together a cheap nas solution (rPI based) and have 2 x 5tb drives in a raid1 exported as smb (/mnt/mister).

Attaching my breakdown of disk usage for /games folder (see attached screenshot)

offset

https://github.com/MiSTer-unstable-nigh ... r/releases

Expand the Assets section to see all unstable builds.

offset

Hi, this is great. Now I can lag test my ipad display...the Time Sleuth did not support that high of a resolution. Thanks for putting this together! what was the average lag on the ipad screen? My results were posted here, I think there was 1 other person that posted their results in that thread also - https://misterfpga.org/viewtopic.php?p=79417#...

offset

Thank you for the replies! N64 recent version seems to need unstable MiSTer. What you are describing are Jotego’s cores in beta. You need his Patreon key in your games folder to unlock them. Maybe you had a previous key and need to update? Good point! I should check his Patreon for an update, I suppose. I thought after putting in the necessary key...

offset

I've just pushed a new version with a 400% speed option, should be available for update within an hour or so... (the reason it's 400% is mainly because x2 or /2 is much easier for the FPGA and causes less stress on the core!) Would it be possible to get the 800% version pushed to the Mister repo so its automatically included as part of update_all?...

offset

retro wrote: ↑Fri Dec 01, 2023 3:30 am
Got it working if drive speed is set to 2X.
The problem above only happens when drive speed is set to 4X.
No idea why though...
The other NGCD images I have work perfectly fine with 4X drive speed

I was able to switch back to 4x on the character select screen and play for awhile, so not sure if the 4x crash is just the beginning.

offset

Requesting that the Centipede 800% speedup be made part of the core that is included as part of update_all. 800% works great for the smaller egret ii trackball/spinner controller. Every time I run update_all my centipede is replaced with the version that doesn't have the 800% update (just 400%). Thanks!

+1 on Millipede core!

offset

The 800% Centipede rbf works great with this controller. Where is the github link to the modified Centipede? Has anyone requested a PR to get it merged with the mainline Centipede core?

offset

Thanks for the information, got this today and have been playing arkanoid with the spinner :) Going to download the 800% centipede rbf and see how I like it. 400% on this smaller trackball does seem a tad slower than it should be. The trackball is definitely smaller and lighter than my x-arcade game trackball. Took me a bit to get used to not being...

offset

thought about the Egret II trackball and spinner for the holidays, but not sure if it works with mister or not. Can anyone confirm its functionality with mister (or mame). Thanks! I can confirm the controller works with MiSTer (after a settings change in mister.ini). One thing to note is that the track ball is slow by default, though there are set...

offset

thought about the Egret II trackball and spinner for the holidays, but not sure if it works with mister or not. Can anyone confirm its functionality with mister (or mame). Thanks!

offset

When I see that, I usually have network issue somewhere. I don't recall if I installed extra linux packages on my mister system, but maybe these commands will help for troubleshooting. # my NAS ip is 10.0.0.33, so obviously you would change it to your IP config in the examples below. # check to see if smb server is running # from the mister /root# ...

offset

I'm curious if anyone is working on the Millipede core. I know you can buy an add-on board to a millipede pcb (https://www.brasington.org/arcade/products/cm/) to play both centipede and millipede so I'm curious how similar the millipede pcb is to centipede pcb.

offset

Got a Misterlaggy (https://misterfpga.org/viewtopic.php?t=7270), if anyone else has this, curious your test results: Was able to test my ipad display running 2048x1536x60 and quite the discrepancy between the top, middle and bottom white bars on misterlaggy test (6ms, 13ms, and 20ms respectively). ipad displays must update differently than monitors...

offset

Check that your Region setting matches the game also. For instance, I couldn't get DonPachi (Japan) working until I changed my Region to Japan in the OSD menu and reset the core.

offset

Millipede I have the 3-in-1 arcade game with Centipede/Millipede/Missile Command and need a backup in case my jamma pcb dies one day. https://www.arcade-museum.com/game_deta ... me_id=7300

offset

Ordered this to try it out. Hoping it will work with MiSTer. I own original rotary game pcbs and ls-30's, but would be cool to have this working on the MiSTer. Now only if this would work with MiSTer AND someone get Cal. 50 working on MiSTer :) Cal. 50 arcade game with impossible to get OPTICAL rotary joysticks (green tops instead of yellow tops) h...

offset

Thanks for putting this together, listened to this today while working. I like the mp3 format, I don't have to fire up my C64 on MiSTer. I guess if the sid files were part of it, I'd use it on a C64 also, but this was pretty convenient.

offset

I use this for my digital i/o board. I have the option for wired or bluetooth headphones. I use the usb power from the mister. https://www.amazon.com/gp/product/B083LVX89D/ I don't need a headphone amp for my headphones (Apple Airpods Max), but saw this bundle (buyer beware I don't own the bundle, just the link above) https://www.amazon.com/dp/B08F...

offset

The original recommendation for the screen protector is in this post (viewtopic.php?p=74199#p74199)

The ebay link from that post is https://www.ebay.com/itm/284678842499

Make sure to order the correct size: 196 x 147 mm

offset

Sorry if this is a noob question.

If I'm running a C64 game (ie. D64) from within a zip, where is the character and game data saved? Is there a separate file elsewhere or is the .zip changed?

Example games:

Questron
Bard's Tale

offset

Just wanted to say thanks for those that recommend complimentary hardware for this screen, I love this monitor and works great on my desk alongside my daily PC. Had to order a second screen protector as I messed up installing it the first time. Taping the edge of the protector and slowly applying it worked, just a bit nerve wracking. Including some...

offset

Love it! Such a fun game to play, spent a lot of money on this one in the arcades.

offset

Issue submitted: https://github.com/MiSTer-devel/C64_MiSTer/issues/153

MiSTer FPGA Forum

Search found 44 matches

Re: Vectrex Output to an Oscilloscope Through VGA Port

Re: Groovy_MiSTer Core

Re: Wishlist of Cores You Would Like to See in the Future

Re: GRS Trackball

Re: Bluetooth Headphones & MiSTer

Re: Castlevania - Symphony of the Night (v1.0)[Meduza Team]

Re: Using a 10TB Hard Drive?

Re: N64 Core

Re: MiSTer Laggy

Re: Konami & N64 beta cores suddenly not working...

Re: Centipede Speed Up request

Re: Samurai Shodown RPG English Translation

Re: Centipede Speed Up request

Re: Taito Egret II Mini Rollerball/Spinner Controller

Re: Taito Egret II Mini Rollerball/Spinner Controller

Re: Taito Egret II Mini Rollerball/Spinner Controller

Re: Taito Egret II Mini Rollerball/Spinner Controller

Re: SMB/CIFS Mount

Re: Centipede Core

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: Saturn Core Does Not Launch Games

Re: Wishlist of Cores You Would Like to See in the Future

Re: New Rotary Joystick From GRS in Pre-prod Testing

Re: Ultimate SID Collection (As Background Music)

Re: Cheap Option for Headphone Audio?

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

save data for C64 game run out of a .zip?

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: Elevator Action

Re: C64 Demo Turn Disk Detection Sometimes Not Working