MiSTer FPGA Forum

after defining the buttons scroll down and hit save.

Do you get a bleep sound when you load the core?

I can't get any bins to load but I'm definitely getting a startup sound when the core loads.

https://github.com/MiSTer-devel/MemTest_MiSTer wrote:

Test is passed if amount of errors is 0. For quick test let it run for 10 minutes in auto mode. If you want to be sure, let it run for 1-2 hours. Board should pass at least 130 MHz clock test. Any higher clock will assure the higher quality of the board.

Have you tested your SDRAM?

I'm using an analog IO to component and it displays properly on my CRT using a custom MiSTer.ini

SirBeers wrote: ↑Sun Apr 28, 2024 10:16 pm

I just got a Moread today and the green channel is very faint - like SO low. Is that what it looks like if you got the bad chip?

can you push the shell back and look at the IC inside of it? What is the PN? I have a moread with an AG6200 and it needs hdmi limited.

I have a moread that requires limited hdmi but at least 1 review suggested some of them don't properly. They seem to sell multiple products or revisions of the same product that have various internals, some of which work great and some have problems. Once I received my analog IO I never hooked it up via direct video ever again.

I just loaded Wipeout (3 or XL, wasn't paying attention) and it came up with no problem

I think my screen goes black for 10-15 seconds while the game loads.

Maybe try the Uberyoji boot roms? My screen kind of flashes (crt) a couple times and then it comes up after maybe 5-10 seconds.

I would possibly try adding some core specific options. I don't know that this will fix the problem but it is the first thing I would try.

what DOS game and how did you install it?
I assume the connection is GPIO to GPIO?

Also possibly check the settings under UART mode? Should be between "Reset player assignment" and "Video processing" in the in-game menu.

Messing around a little more I think you just need to set VGA_SCALER=1 and DIRECT_VIDEO=1 in a copy of your MiSTer.ini

The image is squished but I don't know anything about modelines or what other setting I may need to tweak to fix it. It may just be my CRT needs adjustment but I like where it sits on all the other cores so oh well.

It's PARTY TIME!

FPGA64 wrote: ↑Tue Apr 23, 2024 7:39 pm

Thats what GrooyMame and MisterCast are for.

https://github.com/iequalshane/MiSTerCast

From what I can tell that requires the use of a PC?

It works and I think I like it more than the actual core just for ease of use. I can click directly on a game from the menu rather than loading a core and then going through the menu. I downloaded the files from the patreon linked in this topic

Please let me know if you need further instruction, it is pretty straight forward.

My router won’t let me edit non-active MAC addresses so I don’t assign static IP addresses on my router.

I have assigned my MiSTer to use a static IP address and have had no problems.

Also you may be able to access your device using mister.local or something similar. You be able to ping just ‘mister’ as well.

Have you tried the remote app? It has a keyboard option with function keys.

How do I play skifree? I want to get eaten by a yeti.

When I open the menu on Toki it shows the JT menu. i am a patron don't know if that matters.

I just ran update_all.sh and it has been put back.

ETA-

Was it always a JT core? It looks like it’s been moved to a JT core? Please explain it to me like I’m 5.

I got TOKI through update_all.sh

Edited to add, it no longer appears to be in my library.

I have my MiSTer hooked up to a CRT and a flat screen. I use both because my TV weighs like 100lbs and I don’t want to rotate it into tate.

Can you plug in a keyboard once and remap it to a button?