Search found 138 matches
- Wed Sep 07, 2022 7:02 pm
- Forum: Display Devices
- Topic: LG 34GN950 - Not working with any 1440p resolution? (re: manual says its supported?)
- Replies: 4
- Views: 820
LG 34GN950 - Not working with any 1440p resolution? (re: manual says its supported?)
I'm testing a new monitor with MiSTer but I can't seem to display 2560x1440 or 1920x1440. However, according to the manual it should be supported: Screenshot 2022-09-07 145109.png I've tried the following modeline but it doesn't produce an image: video_mode=2560,48,32,80,1440,2,4,38,183000,+hsync,-vsync Send HDMI parameters: video: 2560(2560), 48(4...
- Tue Apr 26, 2022 2:41 pm
- Forum: Input Devices
- Topic: Anybody have an extra Steam Controller dongle?
- Replies: 0
- Views: 670
Anybody have an extra Steam Controller dongle?
Does anybody have an extra Steam Controller dongle they would be willing to sell?
Thanks
Thanks
- Mon Feb 21, 2022 2:56 am
- Forum: Official Addon Boards
- Topic: BOM list for Digital I/O Board
- Replies: 5
- Views: 5275
Re: BOM list for Digital I/O Board
Does anybody have an updated BOM or is the one from pacoarcade correct?
- Sat Jan 08, 2022 8:43 pm
- Forum: PC 486SX (ao486)
- Topic: RetroWave OPL3 Sound Card (USB/SPI) with ao486? (Similar to External MT32-PI?)
- Replies: 11
- Views: 11961
Re: RetroWave OPL3 Sound Card (USB/SPI) with ao486? (Similar to External MT32-PI?)
That would be awesome, but there are many problems... 1) ao486 core needs to be modified to send OPL data to user-port. 2) mt32pi needs to be modified to recognize data and send to RetroWave OPL3. 3) RetroWave OPL3 card outputs to 3.5mm jack and has no interface to send data back to ao486 core. Unfortunately I'm not too hopeful on accurate OPL emul...
- Wed Nov 24, 2021 8:38 pm
- Forum: Display Devices
- Topic: Laser Bear 9.7" LCD Driver Board
- Replies: 10
- Views: 7918
Re: Laser Bear 9.7" LCD Driver Board
I'm also wondering about the new firmware ... I received my programmer a little while ago and am looking forward to giving this a test.
- Mon Oct 04, 2021 7:31 pm
- Forum: Display Devices
- Topic: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄
- Replies: 522
- Views: 4439281
Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄
Where do you live? I 3d printed one that Sigismond0 https://www.thingiverse.com/thing:4721767, cost me about £25 from Craftcloud. Thanks! I did see that one but it doesn't include holes for the speakers. I'm a beginner a 3D modeling (simple cases/boxes, PSU mounts) but I don't think I have to skill to add them unfortunately. Also, my Ender 3 print...
- Fri Oct 01, 2021 2:30 am
- Forum: Display Devices
- Topic: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄
- Replies: 522
- Views: 4439281
Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄
Does anybody know of a case for somebody who already has the screen and board?
I've been looking at the LaserBear 3D case but I don't like the large CRT version. They are creating a tablet-shape (like the one from this product) but it might be a while.
I've been looking at the LaserBear 3D case but I don't like the large CRT version. They are creating a tablet-shape (like the one from this product) but it might be a while.
- Wed Sep 01, 2021 1:25 pm
- Forum: General Discussions
- Topic: Maximum input voltage for DE10-Nano / IO Board / USB hub?
- Replies: 5
- Views: 2331
Re: Maximum input voltage for DE10-Nano / IO Board / USB hub?
OK - Thanks for the help everybody!
- Tue Aug 31, 2021 7:03 pm
- Forum: General Discussions
- Topic: Maximum input voltage for DE10-Nano / IO Board / USB hub?
- Replies: 5
- Views: 2331
Re: Maximum input voltage for DE10-Nano / IO Board / USB hub?
Thanks for the reply and information.
I agree that I don't want to risk using anything not within tolerance. I can't find any actual datasheet on the DE10-Nano to see exactly what the minimum/maximum voltage is though.
I've also reached out to Terasic to see what they say but until I find out for sure I won't be providing anything above 5V.
I agree that I don't want to risk using anything not within tolerance. I can't find any actual datasheet on the DE10-Nano to see exactly what the minimum/maximum voltage is though.
I've also reached out to Terasic to see what they say but until I find out for sure I won't be providing anything above 5V.
- Tue Aug 31, 2021 5:12 pm
- Forum: General Discussions
- Topic: Maximum input voltage for DE10-Nano / IO Board / USB hub?
- Replies: 5
- Views: 2331
Maximum input voltage for DE10-Nano / IO Board / USB hub?
Does anybody know the maximum input voltage for the DE10-Nano (and the I/O and USB boards) ? I'm wondering if it would be safe to use 6V to allow for voltage drop, etc. I think somebody on Discord mentioning the DE10-Nano having over-voltage protection at 6V but I'm wondering if anybody has concerned this (and I don't want to fry any of my componen...
- Sat Jul 03, 2021 1:20 am
- Forum: Display Devices
- Topic: The Result of My Search for a Great MiSTer Display
- Replies: 186
- Views: 101823
Re: The Result of My Search for a Great MiSTer Display
So what's the verdict on the best monitor for MiSTer?
I have an LG 27UK600-W (4K) secondary monitor but I've been looking for something that supports up to 75 Hz for DOS gaming, but the 27UK600 does sync to all refresh rates I've been able to throw at it. (under 60 Hz of course)
I have an LG 27UK600-W (4K) secondary monitor but I've been looking for something that supports up to 75 Hz for DOS gaming, but the 27UK600 does sync to all refresh rates I've been able to throw at it. (under 60 Hz of course)
- Sun Jun 13, 2021 12:50 am
- Forum: Display Devices
- Topic: Possible to emulate 15 kHz display on 31 kHz (480p) by using scanlines?
- Replies: 15
- Views: 6637
Re: Possible to emulate 15 kHz display on 31 kHz (480p) by using scanlines?
Could you upload your modified core so I can give it a test?
- Mon Jun 07, 2021 11:49 pm
- Forum: Display Devices
- Topic: Possible to emulate 15 kHz display on 31 kHz (480p) by using scanlines?
- Replies: 15
- Views: 6637
Re: Possible to emulate 15 kHz display on 31 kHz (480p) by using scanlines?
Yeah I do understand a CRT monitor won’t be the same as a TV hopefully it’s still a good option.
Does 100% scan lines display the original 240p and then blank (black) lines where they would normally be?
Does 100% scan lines display the original 240p and then blank (black) lines where they would normally be?
- Mon Jun 07, 2021 1:40 pm
- Forum: Display Devices
- Topic: Possible to emulate 15 kHz display on 31 kHz (480p) by using scanlines?
- Replies: 15
- Views: 6637
Possible to emulate 15 kHz display on 31 kHz (480p) by using scanlines?
Is it possible to have a 31 kHz monitor emulate a 15 kHz display by injecting blank/scanlines? I was watching a video from Bob at RetroRGB (https://www.youtube.com/watch?v=iLkN2AZLBMA) that showed a 31 kHz (480p) VGA monitor connected to an OSSC and by using the OSSC scanline feature he was able to have the 31 kHz monitor look identical to the 15 k...
- Tue May 25, 2021 7:58 pm
- Forum: General Discussions
- Topic: External speaker amplifier makes loud pop when switching cores and turning on/off?
- Replies: 5
- Views: 2374
Re: External speaker amplifier makes loud pop when switching cores and turning on/off?
Thanks so much for the information ... That's the exact issue I'm having. I should have searched better before posting. Did you find a DAC that eliminates the popping? You mentioned in that thread you still have the issue, but somebody commented later on recommending the FiiO D3? EDIT: Jotego also seems to recommend this PROZOR 192KHz Digital to An...
- Tue May 25, 2021 5:04 pm
- Forum: General Discussions
- Topic: External speaker amplifier makes loud pop when switching cores and turning on/off?
- Replies: 5
- Views: 2374
External speaker amplifier makes loud pop when switching cores and turning on/off?
I'm using a MiSTer in a custom arcade cabinet (ie. CRT TV with arcade controls, etc) but I'm using a car speaker amplifier connected to speakers. Here is the setup: MiSTer -> Extron SW4 VGA/Ars Switcher -> Volbox inline audio volume -> JBL DA4002 Amplifier -> 2x Speakers Everything works perfectly except there is a loud pop when I turn the MiSTer o...
- Mon May 10, 2021 1:13 pm
- Forum: PC 486SX (ao486)
- Topic: RetroWave OPL3 Sound Card (USB/SPI) with ao486? (Similar to External MT32-PI?)
- Replies: 11
- Views: 11961
Re: RetroWave OPL3 Sound Card (USB/SPI) with ao486? (Similar to External MT32-PI?)
That's also a good idea but it looks like it uses 11 of the 25 pins on the parallel port (DB25) connector. I don't think the MiSTer has that many more available with everything else it uses?
- Mon May 10, 2021 2:18 am
- Forum: PC 486SX (ao486)
- Topic: RetroWave OPL3 Sound Card (USB/SPI) with ao486? (Similar to External MT32-PI?)
- Replies: 11
- Views: 11961
RetroWave OPL3 Sound Card (USB/SPI) with ao486? (Similar to External MT32-PI?)
Does anybody know if it's possible to add support for something like the RetroWave OPL3 Sound Card to the ao486 core? I'm also interested in sound emulation as accurate as possible and this "sound card" is basically an authentic YMF262 chip with an SPI I/O extender. It's also Raspberry Pi compatible or they sell a compact PotatoPi Lite to...
- Mon May 10, 2021 1:53 am
- Forum: Other Computer / System Cores
- Topic: FM Towns Core
- Replies: 82
- Views: 43470
Re: FM Towns Core
Woah.... this is EXTREMELY exciting! Is there a Patreon to support development?
- Mon May 03, 2021 8:13 pm
- Forum: General Discussions
- Topic: Possible to create a chiptunes (VGM?) player core?
- Replies: 1
- Views: 1640
Possible to create a chiptunes (VGM?) player core?
Is it possible to combine the various audio chip cores (Jotego's Yamaha cores, OPL3 FPGA core, etc) to create an FPGA VGM player?
I certainly do not have the skill or understanding to create one, but I think this is something that many people would be excited for?
I certainly do not have the skill or understanding to create one, but I think this is something that many people would be excited for?
- Mon May 03, 2021 8:09 pm
- Forum: PC 486SX (ao486)
- Topic: OPL3 Test
- Replies: 19
- Views: 10640
Re: OPL3 Test
Has there been any updates to this?
It sounds like it's impossible (due to FPGA space) to implement into the ao486 core, but I'd love a core with an accurate OPL3 just to play audio files, etc.
It sounds like it's impossible (due to FPGA space) to implement into the ao486 core, but I'd love a core with an accurate OPL3 just to play audio files, etc.
- Fri Apr 02, 2021 2:59 am
- Forum: Display Devices
- Topic: LG 34GN850 - 3440x1440 - Ultrawide monitor for MiSTer?
- Replies: 3
- Views: 2480
LG 34GN850 - 3440x1440 - Ultrawide monitor for MiSTer?
I'm looking to buy a new ultrawide monitor for my PC and have been specifically looking at the LG 34GN850. I'm hoping to buy a monitor that is perfect for both PC games AND using the MiSTer. The monitor supports freesync so I believe there is a good chance it will support most refresh rates from the MiSTer cores. For example, I want to play ao486 g...
- Tue Mar 16, 2021 1:56 am
- Forum: Input Devices
- Topic: Xbox Wireless Adapter Driver (xow) Ready for Testing
- Replies: 38
- Views: 25669
Re: Xbox Wireless Adapter Driver (xow) Ready for Testing
Quick question. Does this XoW driver now come as standard with MiSTer Main, or is it still in testing? I'm considering a backup/reformat/refresh of my MiSTer for general maintenance, and figured I'd wait until XoW is ready for prime time (even though I realise it can be installed manually, having already done so in my current install). Thanks! Wit...
- Sat Jan 30, 2021 4:32 pm
- Forum: Input Devices
- Topic: Xbox Wireless Adapter Driver (xow) Ready for Testing
- Replies: 38
- Views: 25669
Re: Xbox Wireless Adapter Driver (xow) Ready for Testing
@Shrapnl, thanks for testing! Your results look like what is expected. The Linux kernel (zImage_dtb) is different from the MiSTer version and the menu version. I'm not sure the version appears anywhere but my custom build might not show a different version regardless. The patched linux kernel adds support for the "fat" Xbox Adapter (as yo...
- Wed Jan 27, 2021 11:10 pm
- Forum: Input Devices
- Topic: Xbox Wireless Adapter Driver (xow) Ready for Testing
- Replies: 38
- Views: 25669
Re: Xbox Wireless Adapter Driver (xow) Ready for Testing
No problem at all. The latest version I've uploaded matches the latest version of xow from their git repository. It seems to contain some miscellaneous items such as correcting xbox property command documentation and ignoring packets from accessories. I don't think it would affect anything we are doing. If the rumble fix turns out to have an issue ...
- Wed Jan 27, 2021 11:05 pm
- Forum: Display Devices
- Topic: What chip does the Benfei HDMI-to-VGA use?
- Replies: 1
- Views: 1445
What chip does the Benfei HDMI-to-VGA use?
I've just purchased this Benfei HDMI to VGA adapter and it's working fine but how can I tell if it's crushing blacks? (ie. hdmi_limited setting)
Here's a picture of the VGA shell but I can't see a way to open it with cutting/dremel?
Here's a picture of the VGA shell but I can't see a way to open it with cutting/dremel?
- Wed Jan 27, 2021 9:30 pm
- Forum: Input Devices
- Topic: Xbox Wireless Adapter Driver (xow) Ready for Testing
- Replies: 38
- Views: 25669
Re: Xbox Wireless Adapter Driver (xow) Ready for Testing
OK - No problem. It was confusing because the initial xow_on.sh script didn't download the xow binary but the current one does. I've gone ahead and committed the latest xow binary (same from .zip above). If you run the xow_on.sh script it will now download that version as well. After a few days of testing if all goes well I'll flag this as version ...
- Wed Jan 27, 2021 8:18 pm
- Forum: Input Devices
- Topic: Xbox Wireless Adapter Driver (xow) Ready for Testing
- Replies: 38
- Views: 25669
Re: Xbox Wireless Adapter Driver (xow) Ready for Testing
Can you please give this binary a try?
Thanks!
Thanks!
- Wed Jan 27, 2021 6:26 pm
- Forum: Input Devices
- Topic: Xbox Wireless Adapter Driver (xow) Ready for Testing
- Replies: 38
- Views: 25669
Re: Xbox Wireless Adapter Driver (xow) Ready for Testing
Hmmm, which Xbox Adapter are you using? The older (larger) one or the newer (slim) version? I'm using the older version and the LED is working OK with the version posted above. Can anybody else verify or test the LED functionality with a newer and older adapter? The only changes to xow between my initial binary this one are two commits (add support...
- Wed Jan 27, 2021 3:49 am
- Forum: Display Devices
- Topic: Can I use a VGA splitter with I/O board? ...or should I use HDMI Direct Video to VGA?
- Replies: 6
- Views: 2732
Re: Can I use a VGA splitter with I/O board? ...or should I use HDMI Direct Video to VGA?
Awesome ... thanks so much for the information.