MiSTer FPGA Forum

From what I remember it does center by default when no FFB is active.
Also there's n FFB driver for it. FFB only possible when connected to the xbox360 console.

PCM audio is super fast on some games.
Try Tempo and Virtua Fighter.

Thanks.
I'm temped to flash my firmware with the one posted in this thread. I might do it in the weekend.

I dont have the new firmware so not sure if that changes things. Overdrive is in the actual display's menu itself. Menu--Advanced -- Over Drive -- On and OD Gain 100, And yes, DVI turns off audio but will give it a bit extra bandwidth which stabilizes cores like GBA for me at video_mode=13 My display does not have an advanced menu. It only have: B...

flynnsbit wrote: ↑Sun Apr 10, 2022 11:43 pm enable DVI, the the actual display settings OSD of the LCD there will be an overdrive, turn that all the way up. With both DVI on and overdrive re-test those cores you were having trouble with.

Hi. Sorry to bump again. I can't find the override option even when using dvi mode? Should I update the firmware to the one posted here?

flynnsbit wrote: ↑Sun Apr 10, 2022 11:43 pm enable DVI, the the actual display settings OSD of the LCD there will be an overdrive, turn that all the way up. With both DVI on and overdrive re-test those cores you were having trouble with.

DVI enabled (tested as it does not output any sound) and I can't find this option on the screen's menu.

flynnsbit wrote: ↑Sat Apr 09, 2022 11:48 pm
Are you setting dvi_mode=1 and do you have overdrive turned all the way up in the display settings?

Dvi disabled. Where is this overdrive setting?

Dont seems to be the same board/controller. His board does not even have the "firmware info screen" :/

Native resolution (video_mode=13) does not work well with my screen. It blanks out in some MiSTer cores, specially jogego ones. On other cores it works perfectly.

640x480 is not for MiSTer. I want to connect a Dreamcast via VGA (480p) to it.
The board my friend have does work. Mine does not work at all at this mode.

Unfortunately I cannot directly answer your question, I need to first test the resolution your are targeting. I assume your reference to VGA is about the resolution and not the connector. I only have a dual HDMI board fitted with RTD 2550. But this should not matter for a resolution test. The resolution alone is not enough, what is the refresh rat...

Doozer wrote: ↑Tue Apr 05, 2022 7:16 pm If you are looking for the FW to pilot an iPad3/iPad4 screen with either an RTD2556T or RTD2550 you can try the following dumps below.

ipad_rtd2556T.bin

ipad_rtd2550.bin

Hi.
Do you know if this dumped rtd2550 firmware supports 640x480 vie VGA?
My board have a rtd2550 and it does not support this resolution.

I'll post the updated tool as soon as I can get @Doozer or someone else to post a known good backup of a firmware that works on the Chinese monitors with the ZBIT memory chip - I don't want to be responsible for any bricked monitors! (This may work better with VGA-compatible monitors too.) I have a pack of firmware files that a chinese seller gave...

Mares wrote: ↑Tue Apr 05, 2022 2:13 am Hi
This looks awesome .I was wondering what arduino boards are you using and is it possible to see some photo's of the wired up boards
great project I am eager to get my negcon working on MiSTer

I'm using a Leonardo. Updated the post above with pictures. Space is too tight for all the wires and it looks messy XD

My fully assembled adapter with two Saturn, one SNES and one PlayStation inputs. There's a three position switch to select between Saturn/MegaDrive, SNES/NES, PlayStation modes. RetroZord1.jpg RetroZord2.jpg Attached below are some pics i took during the build process. The wiring is a mess and the spacing is too tight. It's two stacked Arduino case...

Quick history In the past I used all sorts of console controllers on a PC via parallel port adapters. Those are unusable nowadays. Used to play MAME with a saturn multitap and a bunch of controllers and it was great. Some years ago I wanted to reuse my old saturn adapter to output via usb. I could not find any adapter do to this. Then I decided to...

Ok.
The F10 key should open the calibration screen even without the composite sync.
The beta zImage_dtb file is required as it contains the guncon2 usb driver.
https://github.com/NolanNicholson/GunCon2-MiSTer

If it still not works, try asking in discord on the controllers channel.

GunCon 2 and Jamma? How is that?
The GunCon2 usb should be connected directly to MiSTer. And you need to get the beta files (the linux image with the guncon2 driver) for it to work.

Hi!
Your guncon to usb adapter is the GunconDuino?
Or it's a guncon1 to guncon2 adapter? If its a guncon2 then just follow what Atfnet said.

Chilli_Vibes wrote: ↑Wed Mar 16, 2022 4:34 pm I take it, the GunCon Gun method has to have composite video to work ?

Not composite video, but composite sync. Requires a CRT display capable of standard definition (15Khz).

Nice.
BTW I've got my adapter working just now. Enabled a quirk on u-boot.txt
usbhid.quirks=0x0000:0x0000:0x040

Without it, mister only responds to the first device of the composite descriptor.

Your adapter is still working on lates mister version?

the no_merge is when mister treats all devices as one. my problem is that currently it only detects the first device and ignore the rest.

I'm working on a custom USB adapter for an arcade fight stick based on a STM32F411. The fight stick has 2 joysticks, 14 buttons, 2 spinners, and a trackball. I've split the controls into three composite HID devices. 2 joysticks (with 7 buttons and 1 spinner each) and one mouse device for the trackball. On Windows everything works great, but I can'...

It's off in the X or Y axis? Or both?
The Y axis will be always a little off.
It might be possible to adjust the offset by calibrating or manually editing the calibration file.

If your display is from china then there's a chance of it now supporting a 480p signal.

Jukk@M wrote: ↑Sun Jan 23, 2022 6:53 am Are the markings visible on your disc chip.
My chip sanded off.

My chip is just like yours. Have the realtek logo only. No model.
Also the same model info on the board. Aliexpress too?

Jukk@M wrote: ↑Sat Jan 22, 2022 12:58 pm Press and hold MENU when you turn on the screen.

Nice find!
My screen displays the exact same info as yours.
On the board it's written RTD2556 but the display shows RTD2550.

Hi. Nice find!

The adapter works with mister's vsync_adjust=2 ?
It add any perceived lag?

Looks like LLAPI support lightguns from variuous systems. With LLAPI a lightgun from a system will work on another system's core? Let's say, use a saturn lightgun on megadrive's core.... And with Saturn and PS1 cores around the corner... Would be possible to ps1 special controllers have full functionality? Like enable/disable analog mode. Send rumb...

Anyone has updated the display already? From Greg and/or from another seller?
I got the board from aliexpress. My driver does not support vga correctly. But seller says that it can be fixed with firmware update. I'm tempted to try.

I got one of these intending to use it for my MiSTer, but I’ve wound up using it mostly as a second screen for my PC. This is kind of off-topic for a MiSTer board, but today I plugged in my SNES classic and realised that it only puts out widescreen, making it horizontally compressed on this 4:3 iPad screen. I can’t change it on the SNES end, does ...