MiSTer FPGA Forum

By default, I don't think there is one. Copy MiSTer_example.ini to MiSTer.ini and customize to taste.

Right. That'll need to get "inserted" info volumes that MiSTer can see as hardfiles.

You can give it a go yourself or I'll take a swing at it next week, but it should be possible to replicate effectively 1:1.

I wonder if the 'installation' of Workbench is using the filesystem versus a HDF...as far as I know, MiSTer will only support the latter.

If you look under All Users/Documents in Windows, is there anything in there that looks like files from Workbench 3.x?

I know about the 'odd' naming, it's because it's an amalgam of several different pieces all calling themselves 3.something.

Alright - my first suspicion was that the encrypted Kickstart wasn't loading, but clearly that's not it.

What is the exact behavior you get when you try?

Eisengrim wrote: ↑Mon Dec 25, 2023 12:59 am

Has anyone succeeded getting Amiga Forever's Workbench 3.x working on MiSTer? I bought the Plus package and have it running in Windows, and I was able to find a 6 MB Workbench 3.1 disk I got running on the MiSTer, but what I'd really like to do is bring over the complete 3.x setup.

Which Kickstart are you trying to use?

Lightwave wrote: ↑Wed Dec 20, 2023 1:25 pm

If you are mapping manually, the first paddle button should be mapped to Fire 1, and the second to Thumb (NOT Fire 2).

Do that again?

I'm using the files from here, and everything works GREAT except the second paddle button...and nothing I've tried will make it work.

What, exactly, is 'Thumb' and where is it found?

mercuryshadow09 wrote: ↑Tue Dec 19, 2023 11:40 pm

True, it doesn't support lightguns. But the HDMI controller adapters are cheaper in the long run.

...which is exactly what Reflex is as well, except it's supported out of the box.

@DiacloneFX Good sleuthing - glad you solved it!

Make sure the "USB 3.0" port contacts are good by doing a continuity test of each port pin to the corresponding GPIO connection pin (found on the schematic). The jumper should definitely be in the IO position. I strongly suspect there's a cold solder joint on the board itself.

Armakuni wrote: ↑Thu Dec 14, 2023 1:34 pm

Joystick auto fire works fine for me using a USB DB9 Daemonbite adaptor and MiSTer also has a built in autofire system

That's interesting - most autofire joysticks require +5V on pin 7, which I didn't know Daemonbite provides.

Would you mind indicating exactly which adapter you bought and from where (by URL if possible)?

You aren't going to get a paddle from SNAC anyway, as the analog portion was long abandoned due to significant issues. Ironically, the only hope of true paddle support is adapting the USB version from the Atari 7800 core.

First hit on Google...

https://wiki.neogeodev.org/index.php?ti ... protection

@pac the obvious CP that prevents boot entirely, agreed - UniBIOS doesn't do anything for the ones with in-game protection.

I've seen some 'bad' CHDs, but it wasn't related to compression rate as far as I can tell. I use them religiously on MiSTer and Retroarch without issue at all.

Red light - completely normal.

Blank screen - likely a refresh rate issue conflict between your arcade display and the CRT. Make sure you've removed or commented out any arcade-monitor-specific modelines and the like from MiSTer.ini.

Make sure you remove the copy protection from affected games...

OK...as long as it's not just me, it's not an issue...you have to literally stare at the countdown to see it, and I'm normally looking at the games.

Mine is ESP32. Like I said, once I updated tty2oled to the latest, the skips are very infrequent...but if you watch long enough, you'll see one. It was far worse before, skipping every 4-5 seconds.

Update: When I updated the tty2oled script, the issue with 'jumping' numbers seems GREATLY reduced (it still happens, but it's extremely infrequent now).

Is that particular function controlled by tty2oled itself? If so, I'll tag @venice about it.

Yep, that's exactly what I was thinking.

OK, we've reached the level of full-scale pedantry, so I'll leave you to it.

I'm not sure I can get on board with that definition of 'accuracy'...fidelity, perhaps.