MiSTer FPGA Forum

Released!!!

I know that it doesn't load the Adam cartridges, and there is some spurious keypress thing the first time. Otherwise it is fairly complete.

New Core: Coleco Adam
- Fairly complete Adam Core, disk and tape support. CP/M works.
- alanswx: adam memory map conversion, and verilator magic
- Frank Bruno (AsicGuy) helped with the verilog conversion, bugs and wrote the AdamNet (based on ColEm)

Fun core!! thank you

Hi guys, I'm trying out the new Help menu to open md files but I get an error that says: /media/fat/linux/glow: No such file or directory. Do you know if there is a way to install glow to have this working? I've ran update and update_all scripts already but I have the same results, also I've some filters enabled for update_all but I'm not sure it ...

I looked at the changes that were made to the sheets. Lots of great ideas. However, I just regret the lack of harmonization between all of them. My favorite style remains the one for Amstrad CPC6128: image of the computer,keyboard and pictures (2 pictures). it keeps as much essential information as possible on the first page: commands, keyboard, r...

Brilliant idea, but not sure why you are calling them "Cheat" sheets ? Load "*" Run How is that a cheat ? It's a command. I decided to change them to "Overview" instead of "Cheat" -- see the ones I actually released. But a cheat sheet for VIM or some tech is usually just a quick summary of commands on a piec...

Hetzen wrote: ↑Tue Mar 29, 2022 1:09 pm The Electron sheet has the wrong colour info. Happy to correct it.

Please fix it!

The help feature uses the Framebuffer mode in linux. So you need to make sure you have framebuffer displayed on HDMI or somehow working on the CRT. I have two monitors hooked up, and it keeps the CoCo3 running on the VGA, while the PDF is on the HDMI. Ok, so do you confirm it can't work on CRT analogue only? I haven't tried to get Framebuffer work...

The help feature uses the Framebuffer mode in linux. So you need to make sure you have framebuffer displayed on HDMI or somehow working on the CRT. I have two monitors hooked up, and it keeps the CoCo3 running on the VGA, while the PDF is on the HDMI.

I don't think the MC-10 and TRS-80 are correct, nor should they be combined.

BTW - the screen shots on some of them are just placeholders until we have more content.

zorrobandito wrote: ↑Sun Mar 27, 2022 9:43 pm What a fantastic initiative! I'll happily contribute as I've built up my own list of do's, dont's, tips and tricks for many systems.

Great! request access, or PM me your gmail capable email address.

Now that the help menu has shipped, I am requesting some help on the PDFs that should accompany each computer and console core. Christophe, and some others have done the initial steps, but I would love some more help. See the source files: https://drive.google.com/drive/folders/1LFrf652OaHRoce2LA_Y6RBhWhlYTYAVs Feel free to request write access to ...

I probably have an off by one issue when I made the FPGA code. Do you think we can correct it with the PNG? Or should I try to go into the core and fix it? I need to look at the code again. Thanks for the quick reply. It's probably possible, chopping off a strip of pixels on the right side and pasting them to the other side, but that would add a l...

I probably have an off by one issue when I made the FPGA code. Do you think we can correct it with the PNG? Or should I try to go into the core and fix it? I need to look at the code again.

CeeDeeVee wrote: ↑Tue Mar 22, 2022 10:38 pm I too am just getting "card?" at the prompt and can't enter any commands, resetting with F10 ends up with the same. I've deleted the core and reinstalled it, same thing. Am I missing something?

Do you have a boot.vhd file?

Dig Dug
+ Add analog video flip, verilator simulation support, update framework (Jimmy Stones)

RX78
+ Updated sys, and added video mixer, should handle scandoubler now

...aaaaaand once again following up to my own question: just tried with another, smaller (2GB) card that I formated FAT (not FAT32), copied the BEEB.MMB file over and it works. So I suppose my question would be, is the issue with the FAT32 aspect or the card size aspect? The original card was 16GB. You can just put the beeb.mmb as boot.vhd on the ...

On a slightly different tangent, does anyone know if it's possible to get networking going? Might be interesting to set up an Appletalk server on my network using something like RetroNAS. The Wiki doesn't mention networking at all, so I'm assuming it's still too early for that. The Mac Plus serial works, tested using ZTerm, and the PPP works with ...

Centipede
+ JimmyStones added high scores / earom, fixed dips, HDMI aspect ratio, and new sys

You probably exited the joystick setup too early. You need to go past the mouse and keep going. It will ask about the analog sticks a second time.

...aaaaaand once again following up to my own question: just tried with another, smaller (2GB) card that I formated FAT (not FAT32), copied the BEEB.MMB file over and it works. So I suppose my question would be, is the issue with the FAT32 aspect or the card size aspect? The original card was 16GB. You can just put the beeb.mmb as boot.vhd on the ...

TRS-80
+ new framework

Apple I
New framework - thanks to JasonA

Confirmed: floppy broken. Something else is broken: at some point I was unable to boot from vhd. I tried everything but no go. I used a previous version of the core and had no problem booting from the same vhd. The floppy seems to work well now -- once I installed the boot roms correctly. I had it in SE mode without the boot rom, and I couldn't ge...

Foose wrote: ↑Tue Mar 08, 2022 12:49 pm

Docs are in progress:
https://docs.google.com/presentation/d/ ... lide=id.p1

How did we forget Centipede!? I remember trying to do that right at the beginning but it uses NVRAM and the original author hadn't implemented it, and I was clueless :D Given I have a working simulation of it now, and understand so much more than I did a year ago, it should be doable so I'll put it on the to-do list. Check the MiST version too and...

EeDee wrote: ↑Fri Feb 18, 2022 4:08 pm Great to have this Core in Main. Thanks
Will tape file support (TAP, UEF...) be added at some point?

I couldn't get the UEF to work on my first try.. I am not sure why. I couldn't load it as a wav over ADC either - I must be doing something wrong.

Camputers Lynx48/96
- new core from Kyp069, ported to MiSTer by rampa069
- verilator simuation by JimmyStones and alanswx
- Partial OSD tape loading support by JasonA (improvements to come)