SNAC DB9 Issue with IO Board 6.1
-
- Posts: 33
- Joined: Sun Mar 07, 2021 7:10 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: SNAC DB9 Issue with IO Board 6.1
Hi I'm having exactly the same issue. I've got the IO board v6.1 and usb SNAC adapter purchased from misterfpga.co.uk as well with AFAIK genuine 3 and 6 button joypads. See images. My start and c buttons do not work on either pad. Any idea what could be wrong? I'm not sure there was an answer above.
- Attachments
-
- IMG_20211010_213222.jpg (4.14 MiB) Viewed 13103 times
-
- IMG_20211010_213154.jpg (3.36 MiB) Viewed 13103 times
-
- IMG_20211010_213137.jpg (3.25 MiB) Viewed 13103 times
-
- IMG_20211010_213108.jpg (5.16 MiB) Viewed 13103 times
-
- Posts: 33
- Joined: Sun Mar 07, 2021 7:10 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: SNAC DB9 Issue with IO Board 6.1
An update: I got a Blisster board and tried the Megadrive pad on the LLAPI HDMI adapters and it works fine. Even more wierdly once the core detects the joypad I can then swap over to SNAC and use all my SNAC hardware.
So I'm not sure it's a SNAC hardware issue - I think there's something up with the core and the initial handshake.
So I'm not sure it's a SNAC hardware issue - I think there's something up with the core and the initial handshake.
-
- Posts: 33
- Joined: Sun Mar 07, 2021 7:10 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: SNAC DB9 Issue with IO Board 6.1
Apologies it wasn't the Blisster LLAPI ports I was using it was the SNAC with HDMI port and a Blisster DB9 adapter that got it working. Once working I can swap back to the usb snac and it'll still work until I switch off the mister/switch core.