HOW TO: Build a compatible VHD in Windows 10 for AO486

howami
Posts: 4
Joined: Fri Sep 04, 2020 1:12 pm

Re: HOW TO: Build a compatible VHD in Windows 10 for AO486

Unread post by howami »

For the VHD: How big can they be? The VHD is Fat32. So the biggest VHD should be 4 GB. But there are VHD with 8 GB. How do you do that and what is the real limit? Thx
Txamin
Posts: 9
Joined: Tue Jul 28, 2020 10:09 am
Has thanked: 7 times

Re: HOW TO: Build a compatible VHD in Windows 10 for AO486

Unread post by Txamin »

4gb is the limit for a file in fat32, not the partition itself
flynnsbit
Top Contributor
Posts: 552
Joined: Sun May 24, 2020 8:07 pm
Has thanked: 185 times
Been thanked: 308 times
Contact:

Re: HOW TO: Build a compatible VHD in Windows 10 for AO486

Unread post by flynnsbit »

Running full 128GB VHDs now that are completely full in DOS 7.1 with zero problems. The key is to only use those as your secondary and keep the primary as just the OS files and keep that one small.
howami
Posts: 4
Joined: Fri Sep 04, 2020 1:12 pm

Re: HOW TO: Build a compatible VHD in Windows 10 for AO486

Unread post by howami »

Well I can't format it with Fat. Only NTFS and exFat if it is a 32GB VHD. And Exfat is not recogniced
flynnsbit
Top Contributor
Posts: 552
Joined: Sun May 24, 2020 8:07 pm
Has thanked: 185 times
Been thanked: 308 times
Contact:

Re: HOW TO: Build a compatible VHD in Windows 10 for AO486

Unread post by flynnsbit »

The best way (not the greatest steps)
1. Create VHD in Windows to the size you want. Initialize it but don't format it.
2. Copy it to your mister on the sd or ssd.
3. mount a dos 6.22 / 7.1 /Win 98 as primary and the new vhd as secondary
3. boot, run fdisk- set the new disk, fdisk it to the max size, reboot
4. format the new disk, it will say it is 64 gig because of a format bug, ignore it, it will format the whole thing.
5. now you can copy/bring it back to your windows machine, mount it, and fill it up with whatever you want. Then back to the mister again...
User avatar
Caldor
Top Contributor
Posts: 930
Joined: Sat Jul 25, 2020 11:20 am
Has thanked: 112 times
Been thanked: 111 times

Re: HOW TO: Build a compatible VHD in Windows 10 for AO486

Unread post by Caldor »

There was a thread about sharing premade VHDs. We found that you can actually make an empty VHD, partition it and format it and then the interesting thing is it can be compressed twice. First time it becomes a few mbyte, but the second time its reduced to a few kbyte.

I made one just below 8gb, because that used to be the limit.
Post Reply