Vertical 50-100hz Automatically synchronize. Resolution 1240 by 1024 Manufactured 1996 has bnc inputs RGB only
I can't get mister to display on screen
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
Anyone have any suggestions how to make it work? if not, is it any good for something else? Thanks
Code: Select all
video_mode=1240,72,136,208,1024,1,3,32,105320
Tried it and no go, thanksFoxbatStargazer wrote: ↑Wed Jul 21, 2021 7:26 pm Try that mode connected to the Mister I/O's VGA port, with vga_scaler=1 and the SoG switch flipped to on/auto.
If you are using HDMI-> some converter, check that it is outputting SoG.
Bit odd if this can't handle 31khz (i.e. scandoubler=1) but them's not in the manual specs.
I'm still new to MiSTer settings. That being said, every time I load up alt 2 and go to ini settings (I think,not sure) it says MiSTer ini settings at top of menu, not alt 2. So how can I change it to apply your mode?mapf wrote: ↑Wed Jul 21, 2021 5:46 pm You can try to find a mode that works for your monitor. This is 1240x1024@60
This would require a hsync of 63.60 kHz which would fit your monitor specs.Code: Select all
video_mode=1240,72,136,208,1024,1,3,32,105320
Mode 4 didn't work, the way it's set up at the moment it shows as you can see in picture. It's that every time image changes it goes out of sync. Not sure if it's cause of going over 100mhz . The monitor has a max resolution of 1240x1024.FoxbatStargazer wrote: ↑Mon Jul 26, 2021 3:53 am Composite sync will not help, the manual says Sync on Green and that is what you need. If are using the VGA port on the Analog I/O board be sure that the SoG switch is in the on or auto position (can flip it while running to be sure, it should sync the moment things work.) If you are using HDMI then it's on your adapter to push out SoG somehow.
Of course you could be sending the correct SoG signal and things still aren't lining up right.
As mentioned you can also try the built-in video_mode=4 which might be a more "standard" timing for 1280x1024.
Yes I did but same result, sync goes out during a change in game screen (example, see new pic). When I hit the ball goes out for a second and then back. Title screen looks like well you can see in pic. I'm gonna try what sorry for got name (it's early) comment before yours later and see if anything changes.
Yes it does it for a moment and then back. I'll adjust the vsnc option first. Then I'll try new mode line. I'll post back with results later today or tomorrow.FoxbatStargazer wrote: ↑Mon Jul 26, 2021 4:43 am Wow sorry, can't read apparently. That's really specific that it can't do 1280....
I guess the next question is when exactly are things in sync or not. Does it just lose sync on a resolution change for a moment, and then come back? Because that is mostly normal, and can be reduced with vsync_adjust=1 or 0, at the price of a bit of lag. If its staying out of sync, then you have to identify what is different about in vs out of sync.
I have had trouble whenever a 1 shows up in a video mode line. If the core sends a refresh rate below what you used to generate the line mode, it might lose sync. You could try this alternate mode line I generate from here: https://v1cdn.destructoid.com/fight%2520copy-620x.jpg
video_mode=1240,80,128,208,1024,3,10,26,105500