Faulty DE10 Nano

Showcase builds, discuss cases, embedding MiSTer into existing computer cases.
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Faulty DE10 Nano

Unread post by antoniovillena »

I have this problem with two de10 nano boards. The system is stucked when I try to load a folder or a core (.rbf file). In this video I compare with a normal de10 nano with the same microSD to demonstrate it's not a problem with the SD configuration. Any ideas how to fix that? I've tried to contact with terasic support department, but they can't solve the problem.

farag
Posts: 3
Joined: Wed Jun 22, 2022 4:24 pm
Has thanked: 1 time

Re: Faulty DE10 Nano

Unread post by farag »

Hi Antonio, is this happening in random samples, or because of new batches using a different board revision? (I ordered a DE10-nano yesterday, expecting to receive it next week -already have the FedEx notification-).
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: Faulty DE10 Nano

Unread post by antoniovillena »

In same batch order of 100pcs
User avatar
Daniel8b
Posts: 24
Joined: Tue Feb 08, 2022 10:03 am
Been thanked: 14 times

Re: Faulty DE10 Nano

Unread post by Daniel8b »

Did you try running anything else than MiSTer setup (for example the content included by default on the SD card)?
farag
Posts: 3
Joined: Wed Jun 22, 2022 4:24 pm
Has thanked: 1 time

Re: Faulty DE10 Nano

Unread post by farag »

I received today a DE10-nano from Terasic. It worked properly using the default configuration + USB hub + analog board (tested with the Master System core, using HDMI output -I tried with the VGA output but I was using a monitor I haven't used before for MiSTer).
User avatar
thisisamigaspeaking
Posts: 231
Joined: Mon May 23, 2022 12:28 am
Has thanked: 74 times
Been thanked: 21 times

Re: Faulty DE10 Nano

Unread post by thisisamigaspeaking »

I got a DE10-nano this week and it works fine, if people are wondering if faulty ones are or were going out as a batch or something.

You might try a totally fresh MiSTer installation rather than re-using an existing one. One difference between the one that works and the ones that don't is I can see that it has an IO board.

It seems unlikely that it works as much as it does but that some problem with the DE10-nano itself is showing up at that particular point.
Post Reply