tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Showcase builds, discuss cases, embedding MiSTer into existing computer cases.
Samy83
Posts: 11
Joined: Sun Jul 24, 2022 3:23 pm
Been thanked: 1 time

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by Samy83 »

venice wrote: Thu Jul 28, 2022 2:57 pm Its an 8266.
So go ahead a re-flash your device following the procedure from here:
https://github.com/venice1200/MiSTer_tt ... led-device

Try at first just

Code: Select all

./installer.sh FORCE
If this doesn't work try

Code: Select all

./installer.sh FORCE HWESP8266
But make sure you INI files are back to default!
Means set ROTATE="no".
I had a little time before my departure: I tried both but the problem is not resolved :roll: :?:
User avatar
salamantecas
Posts: 108
Joined: Sat Feb 26, 2022 8:31 pm
Has thanked: 110 times
Been thanked: 14 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by salamantecas »

my advice is to return that screen to the "seller" and make one for yourself with the help of the forum
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

Samy83 wrote: Fri Jul 29, 2022 7:18 pm ...
I had a little time before my departure: I tried both but the problem is not resolved :roll: :?:
I have no more ideas as everything works with my 8266.

Could you try again now what happens if you activate ROTATE.
If you can, make a video please.

Maybe someone else who is using Antonios Display can confirm that a non-rotated display is aligned like following picture shows.
C905D116-BEDB-489D-B9D3-C069170E0046.jpeg
If you can, please test ROTATE=„yes“ as well.

//Edit
The Orientation shown above is confimed by Antonio as "Non-Rotated".
You do not have the required permissions to view the files attached to this post.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

We have added our Add-On Projects (tty2oled/i2c2oled/tty2tft/snac2iec) to the MiSTer Wiki.
See: https://github.com/MiSTer-devel/Main_Mi ... n-Projects

Nothing Special, just to complete the documentation a little bit.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

Some organizational's
  • The released testing Version 220731T contains the new XOTA Option for optional OTA Support. Sketch consumption reduced from 65% to 28% if OTA is not enabled.
    If no one complains, OTA Support will be removed in one of the next releases.
  • The SSD1322 Library got a very Minor Update to v0.1.2. No functional changes. Please update If you compile yourself.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
salamantecas
Posts: 108
Joined: Sat Feb 26, 2022 8:31 pm
Has thanked: 110 times
Been thanked: 14 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by salamantecas »

Omg sorgelig's cat comes out with an umbrella and a martini....has anyone noticed that?
User avatar
LamerDeluxe
Top Contributor
Posts: 1160
Joined: Sun May 24, 2020 10:25 pm
Has thanked: 798 times
Been thanked: 257 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by LamerDeluxe »

salamantecas wrote: Sun Jul 31, 2022 2:40 pm Omg sorgelig's cat comes out with an umbrella and a martini....has anyone noticed that?
Haha, yeah, I noticed that too, summer tty2oled, really cool 8-)

Also MiSTer SAM now shows faint bars behind the titles, I thought my hardware was failing at first.
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

The last two additions!
May I ask to add another column to the right, named tty2rpi? No hurry, yesterday is enough ;) In fact ~4,500 pictures are already done by community, project is almost finished but needs some polishing and documentation, so within the next weeks would be totally ok.
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 97 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by Moondandy »

Was actually meaning to message you about that project to see if I could help you there, I have an idea so ping you a DM. That's a lot of pictures you have done!

Can we get one for "creativision.rbf"?
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

Moondandy wrote: Mon Aug 01, 2022 5:02 pmCan we get one for "creativision.rbf"?
Absolutely, here they are. But before publishing them to GIT, is the CORENAME creativision really the right one or a guess?
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

Moondandy wrote: Mon Aug 01, 2022 5:02 pmThat's a lot of pictures you have done!
You mean the mentioned 4,500 ones? Thank you, but I haven't done a single one yet :) They are all coming from Progetto-Snaps, an Italian site for Arcade (and MAME) resources.
https://www.progettosnaps.net/marquees/
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 97 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by Moondandy »

RealLarry wrote: Tue Aug 02, 2022 5:06 am
Moondandy wrote: Mon Aug 01, 2022 5:02 pmCan we get one for "creativision.rbf"?
Absolutely, here they are. But before publishing them to GIT, is the CORENAME creativision really the right one or a guess?
Actually, my bad, should be "CreatiVision" :-)
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

...and the latest addition:
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

Breaking News :D

We cracked the 300 tty2oled users line, with more than 1200 Pictures, this week
and I like to remember you that you can donate by sending a simple postcard to me.

See here https://github.com/venice1200/MiSTer_tt ... i/Cardware for details.

A big thank you to all picture contributors.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

venice wrote: Sat Aug 06, 2022 1:37 pm A big thank you to all picture contributors.
Aaah, I feel vibrations :ugeek:
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
UScr00ge
Posts: 15
Joined: Wed Jul 08, 2020 1:01 am
Location: USA
Has thanked: 3 times
Been thanked: 4 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by UScr00ge »

Greetings. I am now an owner of the same prebuilt tty2oled from www.antoniovillena.es as some of the other posters in this thread. I would have much rather built my own, but sadly I do not know how to solder.

After following the Github doc for updating the ESP8266 everything is working great with my tty2oled ... except (you guessed it) ... MiSTer SAM.

This thread, especially recent posts by venice, the Git docs for tty2oled, and the MiSTer SAM thread have been a great help in troubleshooting. When I received the tty2oled from antonio, I updated the firmware to the latest version and updated my MiSTer_SAM.ini to enable tty2oled. I have a default tty2oled-system.ini and a blank tty2oled-user.ini. Also set MiSTer_SAM.ini ttyuseack=yes.

Once MiSTer_SAM auto start kicks in, I see the system logo, followed by the attached screenshot. Almost every single time after the core logo appears, I see CMDDUPD then display until the next game is loaded, and the cycle repeats (system logo, followed by CMDDUPD). Every once in a while, seemingly almost at random, the game name will display with the correct count down, but 95% of the time it just displays CMDDUPD.

Since the tty2oled seems to be displaying system images just fine outside of MiSTer SAM as best as I can tell, I was going to hit up the MiSTer SAM thread, but I saw the post from jacob.pederson a few posts back about seeing a specific message in dmesg | grep tty. I get the same message as he did:

Code: Select all

/media/fat# dmesg | grep tty
[    1.071856] ch341-uart ttyUSB0: break control not supported, using simulated break
[    1.072062] usb 1-1.1: ch341-uart converter now attached to ttyUSB0
.... but I tried his workaround with commenting 3 lines out of MiSTer_SAM_on.sh and it did not help.

I also tried a shorter USB cable as well as reflashing using ./installer.sh FORCE HWESP8266 with no luck. Can anyone think of anything else to try before I hit up the MiSTer SAM folks, and is that "ch341-uart ttyUSB0: break control not supported" a normal message for the ESP8266?

Edit: We'll, switching and swapping about half a dozen micro USB cables, as well as letting MiSTer SAM autostart versus forcing it to manual start in the MiSTer SAM settings screen (a tip I found in the MiSTer SAM thread) has gotten it a lot more consistent in showing the rom name ... I've only seen CMDDUPD a couple of times since. Going to keep an eye on it.
You do not have the required permissions to view the files attached to this post.
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

Hi,
do you use the Standard SAM Version or a testing version?
I think the dmesg information are just informational.

Do you set ROTATE=“yes”?
The Display Orientation looks wrong to me.
See my pictures above!

As the 8266 is much slower than the ESP32, timing problems can happen so you see commands written on the screen instead of get them processed.

/Edit
…or the Firmware is too old and doesn‘t know the command.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
salamantecas
Posts: 108
Joined: Sat Feb 26, 2022 8:31 pm
Has thanked: 110 times
Been thanked: 14 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by salamantecas »

As Venice says, the screen you show is upside down. Ever since I changed my esp8266 for ttygo 1.8 it's like having upgraded to a mustang 500 and competing with toretto. What seems strange to me is that there is a common denominator for all of you who fail with it, you say that you have been able to update to the latest version of the firmware with this screen from Antonio, can you show an image with the number on the left before loading?
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

The 8266 is not bad, just slower.
Applications need to be adjusted for the different timings.

In the past I had no problems using my 8266 Display with SAM.

//Edit

I have installed the actual SAM Version and let run it with my 8266, no problems.
I get

Code: Select all

ch341-uart ttyUSB1: break control not supported, using simulated break.
as well.

I start SAM manually running

Code: Select all

MiSTer_SAM_on.sh start
I have enabled tty2oled support in SAM ini and set ttyuseack="Yes".

Cheers

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

...com'in out of the dark to entertain you:
montage.jpg
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
lunch_box
Posts: 14
Joined: Sat Jun 27, 2020 7:15 am

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by lunch_box »

Hi all, I have put together my tty2oled and connected it to my mister.

When I run the update script, I get this message “could not connect to interface. Please check usb connection and run script again”

Where am I going wrong? Also My screen does not power up, but I assume I need to update the ttgo8 first?

Thanks

Edit. I have looked through the thread and I typed lsusb into f9 menu on my mister, and the device does not show up. I’m stumped!
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

Some USB cables just give power only.
Try another one.

See also here:
https://github.com/venice1200/MiSTer_tt ... leshooting

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

Prehistoric Isle? Duh! Never heard of it, but sounds very funny. Will give it try on my MAME-O-Mat.
Meanwhile, here's the picture for it. Yeah, I'm faster than light. :D
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
Samy83
Posts: 11
Joined: Sun Jul 24, 2022 3:23 pm
Been thanked: 1 time

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by Samy83 »

venice wrote: Sat Jul 30, 2022 6:48 am
Samy83 wrote: Fri Jul 29, 2022 7:18 pm ...
I had a little time before my departure: I tried both but the problem is not resolved :roll: :?:
I have no more ideas as everything works with my 8266.

Could you try again now what happens if you activate ROTATE.
If you can, make a video please.

Maybe someone else who is using Antonios Display can confirm that a non-rotated display is aligned like following picture shows.
C905D116-BEDB-489D-B9D3-C069170E0046.jpeg
If you can, please test ROTATE=„yes“ as well.

//Edit
The Orientation shown above is confimed by Antonio as "Non-Rotated".
Hi,

I just returned from holidays.
I tried to reflash today and this time, it worked !! :D

Thanks a lot for your help .

Sam
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by venice »

Great to hear!
Everything works as expected?
Orientation correct?

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

Samy83
Posts: 11
Joined: Sun Jul 24, 2022 3:23 pm
Been thanked: 1 time

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by Samy83 »

Yes, everything works perfect now with correct orientation.
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

One for Jotego's Patreons like I am since years. Happy gaming!
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
User avatar
salamantecas
Posts: 108
Joined: Sat Feb 26, 2022 8:31 pm
Has thanked: 110 times
Been thanked: 14 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by salamantecas »

I leave a few images before Larry wakes up

names are

nspirit=ninja spirit
lohtj=Legend of Hero Tonma
imgfight=Image Fight
dbreedjm72=Dragon Breed
You do not have the required permissions to view the files attached to this post.
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

salamantecas wrote: Thu Aug 25, 2022 7:29 am I leave a few images before Larry wakes up
Good job, well made and named. Thanks a lot. Pictures are uploaded and available to all.
Hehe, that's usually impossible to do tasks before I'll wake up, but actually I'm on holiday@home with my wife, enjoying a long sleep and more drinks in the evening.

Hohoho and a bottle of rum!
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
User avatar
RealLarry
Top Contributor
Posts: 768
Joined: Mon May 25, 2020 4:04 am
Location: San Junipero/DE/Earth
Has thanked: 86 times
Been thanked: 329 times

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Unread post by RealLarry »

...todays additions:
You do not have the required permissions to view the files attached to this post.
Contributor of tty2oled, author of tty2tft, tty2rpi and update_tty2xxx
Post Reply