Page 1 of 1
Akuma-kun - Makai no Wana
Posted: Fri Oct 29, 2021 9:00 am
by Ko2
Akuma-kun - Makai no Wana
Mappers 153
It did not start correctly. Is there a solution?
- akuma1.jpg (170.25 KiB) Viewed 5104 times
Re: Akuma-kun - Makai no Wana
Posted: Fri Oct 29, 2021 9:43 am
by mapf
Ko2 wrote: ↑Fri Oct 29, 2021 9:00 am
Akuma-kun - Makai no Wana
Mappers 153
It did not start correctly. Is there a solution?
The rom in my collection (I have the Smokemonster set, I think) works fine with the latest core. Could start the game, see the intro text, walk around and fight ghosts.
Code: Select all
md5sum Japan\ A-D/Akuma-kun\ -\ Makai\ no\ Wana\ \(Japan\).nes
6e8f662e8925873c993cf00b9d167478 Japan A-D/Akuma-kun - Makai no Wana (Japan).nes
Re: Akuma-kun - Makai no Wana
Posted: Fri Oct 29, 2021 12:29 pm
by Lightwave
Make sure your ROM has an iNES 2.0 header.
(The CRC32 for that ROM with the correct header should be BC08186B)
Re: Akuma-kun - Makai no Wana
Posted: Fri Oct 29, 2021 1:08 pm
by paulbnl
It is listed as mapper 16 submapper 4 in Nes20db.xml:
Code: Select all
<game><!-- Licensed Japan\悪魔くん꞉ 魔界の罠.nes -->
<prgrom size="131072" crc32="E699A97C" sha1="6F3BBCE3D234A68747BCCCFD3909C5EDCF12C875" sum16="9915" />
<chrrom size="131072" crc32="DFA83B7E" sha1="AA9DFFC596924A05E90F5148A703095A51214A13" sum16="FBE6" />
<rom size="262144" crc32="2C4421B2" sha1="869C2F50F936C17CB1B13E9016E44E474137A320" />
<pcb mapper="16" submapper="4" mirroring="H" battery="0" />
<console type="0" region="0" />
<expansion type="1" />
</game>
Re: Akuma-kun - Makai no Wana
Posted: Fri Oct 29, 2021 11:39 pm
by Ko2
This software was something I dump from a cartridge the other day.
I edited the header based on your opinion and changed it to Mapper 16, and it started without any problems.
Thank you very much.
- akuma2.jpg (166.47 KiB) Viewed 4880 times