MiSTer FPGA Forum

@sorgelig

please can you push slingshot mod on MiSter

thanks in adavance

https://github.com/gyurco/Amstrad_MiST/ ... ea9c418cbd

MiST update

TZXPlayer: add a progressbar overlay

https://github.com/gyurco/Amstrad_MiST/ ... e8be5f6114

TZXPlayer: more precise tick counting

https://github.com/gyurco/Amstrad_MiST/ ... 27c9a32ec4

CRTC: attempt to fix constantly re-triggered VSYNC in the same row

https://github.com/gyurco/Amstrad_MiST/ ... 3e3ea9d101

perhaps other tape core like spectrum can profit from slingshot progressbar as well ?

thanks sorgelig for crtc fix

what about tzxplayer fix ?

isn't possible to port progressbar ?

fdc disabled doesn't seem to work anymore

marmelade say to switch off fdc at start
https://www.cpc-power.com/index.php?pag ... s&num=1359

for any that want last tape mod from MiST

pass birdie, basil, bride of frankenstein ...

Chopper Squad (UK) (1984) [Original] [TAPE] CDT doesn't load

https://www.cpc-power.com/index.php?pag ... ps&num=557

blue screen ... of death

https://www.cpc-power.com/index.php?pag ... l&num=9029

breiztiger wrote: ↑Sun Feb 14, 2021 3:26 pm blue screen ... of death

https://www.cpc-power.com/index.php?pag ... l&num=9029

like you, blue screen

hi

Betasoft Demo 7 Interlace Demo start with last build but very problematic screen (split into two screen)

none can take some time to port this MiST update ?

TZXPlayer: add a progressbar overlay

https://github.com/gyurco/Amstrad_MiST/ ... e8be5f6114

i think it can be also usefull for spectrum and all other tape computer

edit : TZXPlayer doesn't seem to be update because Bride of Frankenstein work on MiST but not on MiSTer

https://www.cpc-power.com/index.php?page=detail&num=475

crtc bug on overflow previews

https://www.cpc-power.com/index.php?pag ... l&num=8064

number 2 number 4 perhaps same bug ?

https://www.pouet.net/prod.php?which=88554

new demo from revision 2021

part two : bug it run at 55hz !!!

Any tips?
I can’t get renegade CDT to load
The commands I am using are
|TAPE
RUN”

It fails , also .. does the core like the files zipped or should I unzip them into the folder because some of the loading times are way too long even the loading screens takes ages to complete ?

I run the games on CPC 64 version

EDIT : can get the Spanish version to load .. the original s as has hit squad crash at loading half way

Also can I load anything into the expansion core option? Take it it’s for ram add on on basic 64k version ? Maybe some failing games may start loading ?

look at viewtopic.php?f=14&t=2345

you can take config like 464 stock

hi

r8 probs

with this test real cpc with crtc 1 make that screen and crtc 0
but with MiSTer we got
crtc 1 crtc 0

fdc bug

report on MiST forum

https://www.atari-forum.com/viewtopic.p ... 33#p417833

fdc bug

https://www.cpcwiki.eu/forum/games/towe ... prototype/

MiST and MiSTer recognise as emulator

https://www.cpc-power.com/index.php?pag ... &num=16067

this demo stop working after some time and some graphics glitch

HI !!

Is it possible to have an option for center screen(in particulary Left & right) ?

EDIT: i suggest this option on github now... This post can be deleted. Thanks.

Anyone know if there are any plans for the Amstrad core to include the Plus and the GX4000?

http://logonsystem.fr/down/shaker18.dsk

then run"rv

crtc0 and crtc1 must be similar

some crtc documents

http://logonsystem.fr/down/SHAKER18-CRTC0.pdf
http://logonsystem.fr/down/SHAKER18-CRTC1.pdf
http://logonsystem.fr/down/SHAKER18-CRTC2.pdf
http://logonsystem.fr/down/SHAKER18-CRTC4.pdf
and
http://logonsystem.fr/down/ACCC2-FR.pdf

MiST side update

**Amstrad_211211.rbf**
- Some FDC updates
- Fix some CRTC behavior (especially CRTC0 ones)
- Allow umounting disk images from the OSD

hi

i have try to include some update of new MiST core

if some want to try ...

i can't make progressbar working, it's too high for my skill

Please, could someone test this rom?, is crashing and must reboot the mister

@catenaccio

This game is a CPM game, this does mean that to run in you've to type |CPM on real hardware, and under the Amstrad Core, instead of |CPM, you've simply to type ùCPM
I've just double checked on my Mister and your game works if you do this.

Strange, it works for me with: run"michel" but not with |CPM

pgimeno wrote: ↑Sat Jan 01, 2022 7:26 pm Strange, it works for me with: run"michel" but not with |CPM

Ah yes, this is strange, on my side if I do this, the core freeze.
Here is the manual of the game, see "INSTRUCCIONES DE CARGA" : https://mega.nz/file/BHpm2ITZ#MMwAY8KFL ... rywHSUzNDU

When you say it works, are you allowed to play the game ? Because, yes, run "Michel" starts the game but after the 1st screen, it hangs

hi

your dsk seem to be a cracked version

can you test with the origianl disk please ?
https://www.cpc-power.com/index.php?pag ... s&num=1411

breiztiger wrote: ↑Sun Dec 12, 2021 3:50 pm hi

i have try to include some update of new MiST core

if some want to try ...

i can't make progressbar working, it's too high for my skill

Thank you @breiztiger do you plan to propose those changes on MiSTer-Devel ? I tested some games and it works great

kathleen wrote: ↑Sat Jan 01, 2022 7:16 pm @catenaccio

This game is a CPM game, this does mean that to run in you've to type |CPM on real hardware, and under the Amstrad Core, instead of |CPM, you've simply to type ùCPM
I've just double checked on my Mister and your game works if you do this.

20220101_191741-screen.png

Tnx kathleen , but how can I type ùCPM? I cannot figure it out