SNAC interface for PSX core

CMR
Posts: 90
Joined: Sun Dec 20, 2020 12:29 am
Has thanked: 33 times
Been thanked: 8 times

Re: SNAC interface for PSX core

Unread post by CMR »

Here is the one I bought.

https://www.ebay.com/itm/325232750362

I wouldn't really recommend it, however, as I confirmed you can't use a virtual memory card with the snac port for that controller enabled. It still works for the second port that isn't snac enabled, but some games don't like saving to the second card even on real systems.

From the wiki:
SNAC can be selected for each port and will support gamepads and memory cards on the corresponding slot. When SNAC is enabled for a slot, the emulated gamepad/memory for this slot is disconnected.
FPGAzumSpass
Core Developer
Posts: 380
Joined: Sat May 23, 2020 12:55 pm
Has thanked: 38 times
Been thanked: 383 times

Re: SNAC interface for PSX core

Unread post by FPGAzumSpass »

You can however use a real memcard on the same slot if your adapter allows.
Psyko_2000
Posts: 6
Joined: Fri Feb 04, 2022 10:01 am
Been thanked: 4 times

Re: SNAC interface for PSX core

Unread post by Psyko_2000 »

mineral55 wrote: Sat Jun 25, 2022 10:14 pm what is that yellow port?!
yellow video port is for guncon support
CMR
Posts: 90
Joined: Sun Dec 20, 2020 12:29 am
Has thanked: 33 times
Been thanked: 8 times

Re: SNAC interface for PSX core

Unread post by CMR »

FPGAzumSpass wrote: Sun Jun 26, 2022 4:22 am You can however use a real memcard on the same slot if your adapter allows.
Yes you could even modify the adapter I have if you have a spare memory card port laying around since the controller and memory card both use the same data lines.
Cyber Akuma
Posts: 13
Joined: Wed Nov 17, 2021 2:36 pm
Has thanked: 18 times
Been thanked: 5 times

Re: SNAC interface for PSX core

Unread post by Cyber Akuma »

multisystem wrote: Thu May 05, 2022 3:31 pm We made up a very quick (hacked) PSX SNAC interface for the Multisystem User port - it's all working quite well in the new PSX Core that now supports direct PlayStation controllers via SNAC. - this is using a port set from a real PlayStation, it's very simple to connect up to the SNAC pins.
Would this even work with some of the more oddball Memorycards like the PocketStation or that MemcardPRO?
alessiman
Posts: 16
Joined: Wed Dec 01, 2021 6:31 am
Been thanked: 5 times

Re: SNAC interface for PSX core

Unread post by alessiman »

Anyone got a diagram or photo of how the Guncon is connected to the display?
alessiman
Posts: 16
Joined: Wed Dec 01, 2021 6:31 am
Been thanked: 5 times

Re: SNAC interface for PSX core

Unread post by alessiman »

alessiman wrote: Sat Jul 16, 2022 10:14 am Anyone got a diagram or photo of how the Guncon is connected to the display?
Nevermind. Worked it out :)
User avatar
neogeo81
Posts: 374
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 32 times
Been thanked: 45 times

Re: SNAC interface for PSX core

Unread post by neogeo81 »

multisystem wrote: Sat May 07, 2022 5:40 pm A few more images of the SNAC-BOX PSX (for the Multisystem USER Port).

Is this something people would like to see made available, or just a set of instructions to make your own? - or both?

This can read two physical memory cards, and works with light guns, PSX mouse, rumble pads / shock feedback/recoil etc. and the Multitap 4 port adaptor.
Hi
You mention that this adapter already has the SNAC 3.3V to 5V in it so that means the pins in this image are wrong (right side means 5V). Shouldn't we set the pins to the left (3.3V) to use this PSX SNAC adapter?
Post Reply