No Signal on HDMI after Mr. Fusion

Just got a MiSTer and need some help? Join the forum and post your questions here!
newcgen
Posts: 5
Joined: Thu Jun 30, 2022 2:10 pm
Has thanked: 3 times

No Signal on HDMI after Mr. Fusion

Unread post by newcgen »

Hi All,

I'm first time user. Mr. Fusion boots OK and I see the install picture.
But after Mr. Fusion reboots, no HDMI signal is present.
the caps lock button works. The LED is on.

Maybe my Mister needs in some configuration?

Could any to help me?
newcgen
Posts: 5
Joined: Thu Jun 30, 2022 2:10 pm
Has thanked: 3 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by newcgen »

Linux from the manual works very well.
jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by jca »

Once I had this problem. I forgot the MISTer.ini file. Rename the MISTer_example.ini to MISTer.ini and see if it helps.
newcgen
Posts: 5
Joined: Thu Jun 30, 2022 2:10 pm
Has thanked: 3 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by newcgen »

Just renaming file doesn't help.
jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by jca »

I was afraid of that: lately it seems it happened to several people. I am not sure if they found a solution. Try to search the forum.
jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by jca »

Look here:
viewtopic.php?t=5012
Try to ssh into your MISTer and type reboot <Enter> to see if your screen comes up.
Malor
Top Contributor
Posts: 860
Joined: Wed Feb 09, 2022 11:50 pm
Has thanked: 64 times
Been thanked: 194 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by Malor »

I wonder if Terasic has changed something in the DE-10 that messes the Mister system up?
User avatar
aberu
Core Developer
Posts: 1144
Joined: Tue Jun 09, 2020 8:34 pm
Location: Longmont, CO
Has thanked: 244 times
Been thanked: 388 times
Contact:

Re: No Signal on HDMI after Mr. Fusion

Unread post by aberu »

Malor wrote: Thu Jul 21, 2022 8:11 pm I wonder if Terasic has changed something in the DE-10 that messes the Mister system up?
There are only 3 revisions and plenty of people have tested the later revisions with no issue like this.
birdybro~
Xbytez
Site Admin
Posts: 469
Joined: Wed May 20, 2020 3:36 pm
Has thanked: 214 times
Been thanked: 787 times

Re: No Signal on HDMI after Mr. Fusion

Unread post by Xbytez »

Just for future reference I have attached the Terasic DE10-Nano revision document, this documents the changes made by the manufacturer to each revision of the DE10-Nano board. The document also explains how to tell which revision of DE10-Nano you have.

Different_in_DE10_Nano_Revision.pdf
(325.05 KiB) Downloaded 102 times
Post Reply