Slow Timing on Core Change

For topics which do not fit in other specific forums.
Robe_Inie
Posts: 6
Joined: Thu Aug 18, 2022 10:04 pm

Slow Timing on Core Change

Unread post by Robe_Inie »

Hello!
I have a problem (I don't remember exactly when it started, but some time ago).

Before, when I changed a core, it was fast. Very fast. Inmediatly.
Now, it takes several more seconds. Perhaps 5-6 seconds more.

I have tried with another SD card (last update 2021) and it works fast (as before), so it has to be some configuration that has changed (I use update_all , I don't know if it influences).

Do you know this problem?
Thanks!
triangle
Posts: 14
Joined: Sun May 24, 2020 11:10 pm
Has thanked: 10 times
Been thanked: 2 times

Re: Slow Timing on Core Change

Unread post by triangle »

Are you using HDMI output? If so, have you changed video_mode or vsync_adjust settings since you remember it being faster?

For me, my HDMI projector is slower to display with some configurations compared to others, and switching cores is one of the things that's impacted by this.
Robe_Inie
Posts: 6
Joined: Thu Aug 18, 2022 10:04 pm

Re: Slow Timing on Core Change

Unread post by Robe_Inie »

Hello Triangle, thanks for your message

No, I usually use CRT with RGB, or VGA ,
I also tried the original mister.INI
Post Reply