MiSTer FPGA Forum

Posted: **Thu Jun 01, 2023 5:52 pm**

Hello all,

I'm trying to figure out how to permanently assign controllers on my MiSTer arcade machine. I'm using Antonio's JAMMA adapter (which is pretty fantastic for the price by the way).

So I see that just recently permanent controller assignments are possible. Here's the relevant section of dmesg after loading the menu:

Code: Select all

[    2.191128] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.191142] usb 1-1.2: Product: Arduino Micro
[    2.191152] usb 1-1.2: Manufacturer: Arduino LLC
[    2.191161] usb 1-1.2: SerialNumber: Daemonbite Arcade
[    2.192793] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[    2.198447] HID usage: 0x00010004, original interval: 1
[    2.198478] JS: endpoint->bInterval=1, interval=1
[    2.198486] HID usage: 0x00010004, applied interval: 1
[    2.198792] input: Arduino LLC Arduino Micro as /devices/platform/soc/ffb40000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:2341:8037.0001/input/input0
[    2.199436] hid-generic 0003:2341:8037.0001: input,hidraw0: USB HID v1.01 Joystick [Arduino LLC Arduino Micro] on usb-ffb40000.usb-1.2/input2
[    2.204369] HID usage: 0x00010004, original interval: 1
[    2.204388] JS: endpoint->bInterval=1, interval=1
[    2.204396] HID usage: 0x00010004, applied interval: 1
[    2.204681] input: Arduino LLC Arduino Micro as /devices/platform/soc/ffb40000.usb/usb1/1-1/1-1.2/1-1.2:1.3/0003:2341:8037.0002/input/input1
[    2.205304] hid-generic 0003:2341:8037.0002: input,hidraw1: USB HID v1.01 Joystick [Arduino LLC Arduino Micro] on usb-ffb40000.usb-1.2/input3

I've tried the following in my ini to no avail:

Code: Select all

player_1_controller=usb-ffb40000.usb-1.2/input2
player_2_controller=usb-ffb40000.usb-1.2/input3

Code: Select all

player_1_controller=0003:2341:8037.0001
player_2_controller=0003:2341:8037.0002

Code: Select all

player_1_controller=usb1/1-1/1-1.2/1-1.2:1.2/
player_2_controller=usb1/1-1/1-1.2/1-1.2:1.3/

I'm on the May 26 distribution so should be all up to date. Any ideas?

Posted: **Fri Jun 02, 2023 3:10 pm**

Antonio responded by email to say that the correct settings would be:

Code: Select all

player_1_controller=2341:8037.0001
player_2_controller=2341:8037.0002

But it's still not working for me. I might try a new mister installation since my ini has been carried over for a long time.

Posted: **Fri Jun 02, 2023 6:08 pm**

Try this:

Code: Select all

player_1_controller=usb-1.2/input2
player_2_controller=usb-1.2/input3

MiSTer FPGA Forum

Permanent assign controller to player issues

Permanent assign controller to player issues

Re: Permanent assign controller to player issues

Re: Permanent assign controller to player issues