MiSTerFPGA.co.uk
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
When I first used 7TCN chips with the v2.5 memory modules, I did test internal air temperatures in the small range of cases available at time, it was during the time I began prototyping the acrylic case I sell. I even went to the point of stress testing inside an acrylic box, with no heatsink or fan on the DE10 Nano, all then wrapped tight in a polythene bag! I did not experience any issues at all with my stress testing setup so a passively cooled case from MisterAddons would even with 30C ambient air surprise me if it got anywhere close to that high of an internal air temperature.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
Re: MiSTerFPGA.co.uk
It's not my intention to hijack this thread but I just wanted to share my experience with misterfpga.co.uk. A few weeks ago, I ordered a USB hub/board, a 128MB RAM module, an acrylic case (full enclosure), and a few other small parts.
Case: looks gorgeous, easy to assemble; took 30 seconds (and I'm a clumsy person)
USB hub: has its own DC barrel jack, so no issues with peripherals that draw more power than usual
RAM module: all Jotego cores work flawlessly. No errors when running the memory tests from Jotego
Service: A+++: very fast response, very fast shipping.
If you want a hassle-free experience and high quality products, look no further. Highly recommended!
Case: looks gorgeous, easy to assemble; took 30 seconds (and I'm a clumsy person)
USB hub: has its own DC barrel jack, so no issues with peripherals that draw more power than usual
RAM module: all Jotego cores work flawlessly. No errors when running the memory tests from Jotego
Service: A+++: very fast response, very fast shipping.
If you want a hassle-free experience and high quality products, look no further. Highly recommended!
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
I have completed another small batch of the mt32-pi HATs, just an update for those who messaged me and were waiting for one.
mt32-Pi for MiSTer
mt32-Pi for MiSTer
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
Re: MiSTerFPGA.co.uk
Nat stop tempting me! I've sworn off Mister purchases until the mistercade becomes available >.<
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
All OLED colour versions of the MT32-Pi HATs are available again, I know a few of you were waiting on the blue and white versions.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
Re: MiSTerFPGA.co.uk
I would like to chime in and also give praise to Nat.
I already owned the DE-10 Nano and a 128 MB RAM expansion prior to ordering from him.
Recently I ordered a proper power supply, MT32pi hat, Analog IO Board with a Noctua fan, copper heat sink, and an in-line power switch from this site and they were shipped to the states promptly, well packed, and all work great. I just placed an order again today for a USB hub PCB and an enclosed acrylic case. Looking forward to getting those to finish off my MiSTer build! I have nothing but good things to say about ordering parts from here. Thanks Nat!
I already owned the DE-10 Nano and a 128 MB RAM expansion prior to ordering from him.
Recently I ordered a proper power supply, MT32pi hat, Analog IO Board with a Noctua fan, copper heat sink, and an in-line power switch from this site and they were shipped to the states promptly, well packed, and all work great. I just placed an order again today for a USB hub PCB and an enclosed acrylic case. Looking forward to getting those to finish off my MiSTer build! I have nothing but good things to say about ordering parts from here. Thanks Nat!
-
- Posts: 17
- Joined: Mon Jul 13, 2020 2:39 pm
- Has thanked: 2 times
Re: MiSTerFPGA.co.uk
Hi Nat. Got the Mt32 today but I’m baffled regarding using the stand offs and screws that were included to attach it to my Pi3b, I’m obviously doing something wrong. Any chance you can help me? Or anyone. Much obliged.
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Your probably not doing anything wrong, the provided standoffs are an alternate standoff size for Raspberry Pi cases which use M2.5 sized threads.punnyandfunny wrote: ↑Thu Nov 25, 2021 12:04 pm I’m obviously doing something wrong. Any chance you can help me?
The way I supply the mt32-pi HAT is with the intention of it sitting directly on top a Raspberry Pi 3 A+ using the recommended case, which is the Geekworm / UGeek aluminium case. More details here in the Wiki:
Recommended mt32-pi Case
Due to the large number of possible configurations, such as different case types and Raspberry Pi models, it is really not possible for me to offer an off the shelf mounting kit which would suit each users setup, I just include the alternate M2.5 size set of screws, nuts and standoffs for use on other RPi cases which require M2.5 sized threads, a useful tip is the black M2.5 standoffs are nylon, and this allows for them to be easily cut with a sharp knife to any required length for neatness when fitting.
If you are mounting on a bare RPi board, you may have to source additional mounting hardware to fit your configuration.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Just a quick update as I've had a few emails over the last week, another batch of mt32-pi HATs are ready and available on the website, all OLED color variants are in stock.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
I would like to take this opportunity to thank all my customers for your continued support throughout 2021. Let me extend my warmest wishes for the festive season and wish everyone a very merry Christmas!
If you are ordering MiSTer bits for Christmas delivery please see my last posting dates on the website, also the dates which I will be closed and taking my Christmas and New Years holidays.
Christmas Delivery Information 2021
If you are ordering MiSTer bits for Christmas delivery please see my last posting dates on the website, also the dates which I will be closed and taking my Christmas and New Years holidays.
Christmas Delivery Information 2021
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Yes I do, the MiSTer case for Digital IO board and BlisSTer hub is available at my web store, just select the required IO board type from the drop down menu selector on the product page along with the color of case you need.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
- marcelosofth
- Posts: 171
- Joined: Wed Sep 22, 2021 10:03 pm
- Location: Brazil - São Paulo
- Has thanked: 6 times
- Been thanked: 3 times
- Contact:
Re: MiSTerFPGA.co.uk
Hi Nat, do you have plans to sell this Case model? Because this model perfectly matches the MT-32pi.
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Sorry I do not.
Did you receive the free set of mt32-pi PCB's I sent to you?
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
- marcelosofth
- Posts: 171
- Joined: Wed Sep 22, 2021 10:03 pm
- Location: Brazil - São Paulo
- Has thanked: 6 times
- Been thanked: 3 times
- Contact:
Re: MiSTerFPGA.co.uk
Nat, yes, I did, even after receiving it I sent you a thank you email, you really did something that you rarely find in good people, I'm very happy, after many cable problems with the MT-32pi but I finally had an end happy, i bought another cable and everything is beautiful and wonderful, thank you my friend.
Re: MiSTerFPGA.co.uk
Hi @Nat!
I placed an order of MT32-PI HAT this Wednesday (Jan 12), but due to my stupidity, I chose the wrong shipping method. Would you please cancel my order?Already sent you a message from the website and I apologize for the inconvenience. Thanks.
I placed an order of MT32-PI HAT this Wednesday (Jan 12), but due to my stupidity, I chose the wrong shipping method. Would you please cancel my order?Already sent you a message from the website and I apologize for the inconvenience. Thanks.
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Shipping method changed as requested and your order was sent out earlier today, thanks for your custom
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
Re: MiSTerFPGA.co.uk
I wanted myself to order one of those transparent MiSTer Acrylic Casees but unfortunatly it's only compatible with a AC PowerIn. My USB hub is a v1.2 with 8 usb ports which one of it is used for USB Power IN.
any custom cases planed?
any custom cases planed?
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Please feel free to send me a message via my websites contact form with your full MiSTer stack specification, I should then be able to custom cut an end panel allowing it to accommodate your setup.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
Re: MiSTerFPGA.co.uk
Just want to say thanks to Nat for the great service he provided for all of my mister parts. Just put it all together and updating the software side of it now
Will deffo use his store again.
Will deffo use his store again.
-
- Top Contributor
- Posts: 1130
- Joined: Thu Jun 11, 2020 2:31 am
- Has thanked: 13 times
- Been thanked: 172 times
Re: MiSTerFPGA.co.uk
Nat is easily the most generous, honest, and fair seller out there.
Ordered a MT-32 pi prebuild from him (which arrived VERY quickly in the US!), had some persistent technical issues, and he showed amazing patience and class helping me all the way through (which ultimately turned out to be a hardware fault totally unrelated to his product!). Very, VERY recommended seller...you cannot go wrong!
Ordered a MT-32 pi prebuild from him (which arrived VERY quickly in the US!), had some persistent technical issues, and he showed amazing patience and class helping me all the way through (which ultimately turned out to be a hardware fault totally unrelated to his product!). Very, VERY recommended seller...you cannot go wrong!
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Thanks for the very kind words, and also your generosity!
Enjoy the the awesomeness that is the mt32-pi on MiSTer
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
I've had a large number of email requests over the last few weeks to make the mt32-pi lite PCB set available so others could build one for themselves. My long term intention was and still is to offer full kits, with all parts needed to build your own excluding the Raspberry Pi Zero 2 W. At the moment I am still waiting on a few more parts needed to complete the kits, so in the meantime I have added just the bare PCB set to the online store. I will update here again once the kits are ready to sell.
PCB sets are here:
Buy MiSTer FPGA mt32-pi lite
PCB sets are here:
Buy MiSTer FPGA mt32-pi lite
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
-
- Posts: 3
- Joined: Tue Jul 27, 2021 6:34 pm
- Been thanked: 2 times
Re: MiSTerFPGA.co.uk
Hello.
Thought I should share my experience with people, to help them decide on whether to use MiSTerFPGA.co.uk or not.
I got my DE-10 almost a year ago and the first thing I bought was an acrylic plate with fan and a 128mb stick from Nat at MiSTerFPGA.co.uk. all fine no problem.
When I decided to get an Analogue IO board and a hub, I was chatting on an Amiga group on Facebook and a guy told me he sells them as a pair for £50, quite a bit cheaper, so I took a chance, I initially had a few problems when the hub was attached, the de-10 wouldn't power up, turned out to be a dodgy in-line switch. I also bought a Meanwell PSU and case from Nat.
The guy who sold me the boards was really helpful and friendly, and helped me get up and running, even sending me another hub to compare. I got going but it never felt truly stable.
Recently I bought an MT32-Pi from Nat, but I foolishly didn't order the USB A-A cable, thinking the one I had would work. It didn't, and 3 cables later I still wasn't up and running, so I spoke to Nat who covered off all possible scenarios and concluded It was either the cable still or the IO board. in the meantime my USB Hub had started intermittently turning off and on, meaning I'd lose connectivity for a second, quite regularly.
So I decided to buy a new Digital IO board and a hub from Nat, and kindly he threw in a new A-A cable. when the new boards arrived, I first tested the new power splitter and the A-A cable and still no luck. This confirmed that the Analog IO board has a fault.
I now have my MiSTer running on the MeanWell PSU, the Digital IO and Hub, 128mb ram and nice case and MT32-Pi, all from MiSTerFPGA.co.uk and I couldn't be happier with the quality of the components (I no longer have any power issues) and the service I have received.
TL;DR
You can get components cheaper but not all things are equal. you get what you pay for. If you are in the UK, go with MiSTerFPGA.co.uk
Thought I should share my experience with people, to help them decide on whether to use MiSTerFPGA.co.uk or not.
I got my DE-10 almost a year ago and the first thing I bought was an acrylic plate with fan and a 128mb stick from Nat at MiSTerFPGA.co.uk. all fine no problem.
When I decided to get an Analogue IO board and a hub, I was chatting on an Amiga group on Facebook and a guy told me he sells them as a pair for £50, quite a bit cheaper, so I took a chance, I initially had a few problems when the hub was attached, the de-10 wouldn't power up, turned out to be a dodgy in-line switch. I also bought a Meanwell PSU and case from Nat.
The guy who sold me the boards was really helpful and friendly, and helped me get up and running, even sending me another hub to compare. I got going but it never felt truly stable.
Recently I bought an MT32-Pi from Nat, but I foolishly didn't order the USB A-A cable, thinking the one I had would work. It didn't, and 3 cables later I still wasn't up and running, so I spoke to Nat who covered off all possible scenarios and concluded It was either the cable still or the IO board. in the meantime my USB Hub had started intermittently turning off and on, meaning I'd lose connectivity for a second, quite regularly.
So I decided to buy a new Digital IO board and a hub from Nat, and kindly he threw in a new A-A cable. when the new boards arrived, I first tested the new power splitter and the A-A cable and still no luck. This confirmed that the Analog IO board has a fault.
I now have my MiSTer running on the MeanWell PSU, the Digital IO and Hub, 128mb ram and nice case and MT32-Pi, all from MiSTerFPGA.co.uk and I couldn't be happier with the quality of the components (I no longer have any power issues) and the service I have received.
TL;DR
You can get components cheaper but not all things are equal. you get what you pay for. If you are in the UK, go with MiSTerFPGA.co.uk
Re: MiSTerFPGA.co.uk
Will you ever sell the MT32-Pi Lite assembled?Nat wrote: ↑Sun Mar 20, 2022 7:17 pm I've had a large number of email requests over the last few weeks to make the mt32-pi lite PCB set available so others could build one for themselves. My long term intention was and still is to offer full kits, with all parts needed to build your own excluding the Raspberry Pi Zero 2 W. At the moment I am still waiting on a few more parts needed to complete the kits, so in the meantime I have added just the bare PCB set to the online store. I will update here again once the kits are ready to sell.
I have one of your regular MT32-PI hats and I'm very happy with it, but I was looking forward to something smaller in my desk.
- Nat
- Posts: 126
- Joined: Sun May 24, 2020 7:28 pm
- Location: United Kingdom
- Has thanked: 9 times
- Been thanked: 70 times
- Contact:
Re: MiSTerFPGA.co.uk
Yes I will, as soon as they are ready I will add them to my web store and update with a post here.
MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/
https://MiSTerFPGA.co.uk/
-
- Posts: 1
- Joined: Tue Apr 19, 2022 1:25 pm
Re: MiSTerFPGA.co.uk
Nat’s store has routinely had stuff that I found hard to get here in the USA and they shipped it to me here quickly, with tracking, and without taking an arm and a leg to do it.
They also helped me generously with a replacement part for something that I offered to pay for! Definite recommendation from me!
They also helped me generously with a replacement part for something that I offered to pay for! Definite recommendation from me!