Re: Show Us Your MiSTers
Posted: Sat Aug 14, 2021 1:12 am
The purple stealth case from misteraddons.com:
MiSTer FPGA Forum
The online community for MiSTer FPGA enthusiasts
https://misterfpga.org/
Show Us Your MiSTers
Page 14 of 21
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 3:55 pm
3D Printed case, Not the final colour, and a few more tweeks to add (internal sata bay for HDD, vga and audio out), but works for me nicely at the moment, can post OpenSCAD files if anyone wants them and try to remember the BOM.... )
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 4:18 pm
@JellyBaby - please do post those files if you are willing to share - excellent build there.
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 5:02 pm
Hello,
what is this system to display on a mini screen "super nintendo" how does it work Please
what is this system to display on a mini screen "super nintendo" how does it work Please
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 5:14 pm
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 6:50 pm
Here you go..... Please Note :
Need build plate of 250 X 210 (Done on Prusa MK3S), Could be split into small parts, but not currently designed for that... (Added to list of things to do
)This is WIP and print at your own risk (But results posted above) plus I do want to add the features listed, not not high on my list currently apart from Drive bay that I will be working on over the next few weeks / months (Lots on at the moment and enjoying all the great core releases from the guys out there), but this will not change the outer shell (Top or Bottom) Idea is to mount over the USB board, fit and forget), VGA and Audio will change the Top Shell at a later date (Or may expand the size of the "Back Filler" so these can be optional....
)No BOM available at the moment (But will pull one together for the brass inserts, USB breakout boards, HDMI lead, M3 Cap Head sizes etc...)... Again just down to time to pull it together
And at some point stick them on Git.....
Enjoy
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 8:31 pm
Brilliant - thank you sir.
Re: Show Us Your MiSTers
Posted: Wed Aug 18, 2021 9:17 pm
Jellybelly wrote: ↑Wed Aug 18, 2021 6:50 pmHere you go..... Please Note :
Need build plate of 250 X 210 (Done on Prusa MK3S), Could be split into small parts, but not currently designed for that... (Added to list of things to do
This is WIP and print at your own risk (But results posted above) plus I do want to add the features listed, not not high on my list currently apart from Drive bay that I will be working on over the next few weeks / months (Lots on at the moment and enjoying all the great core releases from the guys out there), but this will not change the outer shell (Top or Bottom) Idea is to mount over the USB board, fit and forget), VGA and Audio will change the Top Shell at a later date (Or may expand the size of the "Back Filler" so these can be optional....
No BOM available at the moment (But will pull one together for the brass inserts, USB breakout boards, HDMI lead, M3 Cap Head sizes etc...)... Again just down to time to pull it together
And at some point stick them on Git.....
Enjoy
There's a good amount of 3d printed parts for MiSTer FPGA on thingiverse, you should post it there too.
Re: Show Us Your MiSTers
Posted: Tue Sep 07, 2021 8:52 am
My Console Style - Mister Case (WIP)
Any feedback would be appreciated
Any feedback would be appreciated
Re: Show Us Your MiSTers
Posted: Tue Sep 07, 2021 1:36 pm
After a brilliant headsup from reddit user kester76a who suggested it reminded him of a USRobitics Modem.
I have modified the model a little to reflect it now.
I have modified the model a little to reflect it now.
Re: Show Us Your MiSTers
Posted: Tue Sep 07, 2021 3:32 pm
...you need some leds in the front
Re: Show Us Your MiSTers
Posted: Tue Sep 07, 2021 8:42 pm
Was just thinking damn where have i seen that shape/case design beforecurrymetaloxide wrote: ↑Tue Sep 07, 2021 1:36 pm After a brilliant headsup from reddit user kester76a who suggested it reminded him of a USRobitics Modem.
Re: Show Us Your MiSTers
Posted: Wed Sep 08, 2021 2:41 pm
Re: Show Us Your MiSTers
Posted: Wed Sep 08, 2021 2:56 pm
Use a microcontroller to simulate the led behaviorcurrymetaloxide wrote: ↑Wed Sep 08, 2021 2:41 pm Thats a good idea. Think i'll copy the light arrangement from the USRobotics Courier modem .
Re: Show Us Your MiSTers
Posted: Tue Oct 05, 2021 1:04 am
Re: Show Us Your MiSTers
Posted: Tue Oct 05, 2021 6:10 pm
I bought it in Aliexpress. I sent all the component measures and they made the cuts.
Re: Show Us Your MiSTers
Posted: Sun Oct 17, 2021 4:00 am
Re: Show Us Your MiSTers
Posted: Sun Oct 17, 2021 2:52 pm
My attempt to integrate into NESPi 4 case. Featuring 2.5" USB drive as a cute removable mini NES cartridge (2TB HDD in my case).
I've added one more hole on the back for full-sized HDMI. Two micro-HDMI holes now hold buttons (USER and OSD). Ethernet and front buttons/connectors are working.
Includes WiFi+BT dongle inside.
There are 2 fans. Original (visible on photo) extracts the hot air to outside. Another one 40mm with small heatsink is under the board. Both fans are quiet and barely hearable.
The only feature i didn't make yet is SD card extension to case's SD slot. I plan to add it later as it's not important because i rarely need to remove SD card.
I've added one more hole on the back for full-sized HDMI. Two micro-HDMI holes now hold buttons (USER and OSD). Ethernet and front buttons/connectors are working.
Includes WiFi+BT dongle inside.
There are 2 fans. Original (visible on photo) extracts the hot air to outside. Another one 40mm with small heatsink is under the board. Both fans are quiet and barely hearable.
The only feature i didn't make yet is SD card extension to case's SD slot. I plan to add it later as it's not important because i rarely need to remove SD card.
Re: Show Us Your MiSTers
Posted: Sun Oct 17, 2021 2:57 pm
oOo i like the idea of the removeable hard drive on a cartridge..
Re: Show Us Your MiSTers
Posted: Sun Oct 17, 2021 6:10 pm
Yeah, a 'NAND slot' of sorts would be great and that would shut some mouths.
Edit: I should make clear, that only Sorg could make that a reality. Everything else that circulates, doesn't take notice of, or integrate the MiSTer framework we all are familiar with; cores won't function as expected, and people should know/be ready to deal with the implications.
Re: Show Us Your MiSTers
Posted: Fri Oct 22, 2021 3:26 am
Re: Show Us Your MiSTers
Posted: Thu Oct 28, 2021 2:28 pm
Yes please provides us with a link. I couldn't find it on Aliexpress. It's almost perfect, I just would want to include the MT32pi
Re: Show Us Your MiSTers
Posted: Thu Oct 28, 2021 4:01 pm
Hello!!! you can buy it here https://www.aliexpress.com/store/911238071
I thought about including the mt32-pi inside the box but I discarded it because of what it occupied and because of the ease of changing the system in the future.
Cheers!
Re: Show Us Your MiSTers
Posted: Sun Oct 31, 2021 5:08 pm
some of these look creative as hell. mine is super bare-bones. i have no case for it yet (i have a translucent one coming in the mail).
Re: Show Us Your MiSTers
Posted: Mon Nov 01, 2021 8:39 pm
Couldn't wait for my MiSTer Multisystem to arrive so I printed this case: https://www.thingiverse.com/thing:2503438 , and cobbled together some stuff. I had a dollar store 7-port USB hub that I velcro'd underneath the case and filled with a USB WiFi and BlueTooth dongle that luckily both were recognized. The RetroBit Saturn controller that I was using with my Sega Saturn also came with a 2.4GHz USB receiver so I already have a great controller next to a 8BitDo SN30 (via BlueTooth). Still using the 8GB MicroSD that came with the DE10-Nano. I soldered a DC-plug to a broken USB cord and to my surprise it boots and runs the system (and my 9.7" screen) from a cheap HAMA 16000mAh powerbank
Re: Show Us Your MiSTers
Posted: Wed Nov 03, 2021 3:12 pm
Your slim Mister case looks great.dennis808 wrote: ↑Mon Nov 01, 2021 8:39 pm so I printed this case: https://www.thingiverse.com/thing:2503438
thank you for this link i will be printing a slim case just like this one.
Re: Show Us Your MiSTers
Posted: Wed Nov 03, 2021 4:22 pm
@annette
Thanks
Be aware though that the opening for the 32MB SDRAM didn't line up; I had to file away about a centimeter to make it fit. Easily done because the PLA isn't that tough. There is a thread mentioned on the Thingiverse page that has different versions of this case posted. I liked this one the best because is was the smallest, but not without it's problems. Also make sure you have some small self-tapping screws to close the case with. I got my screws from a broken keyboard that I dismantled. Good luck!
Thanks
Be aware though that the opening for the 32MB SDRAM didn't line up; I had to file away about a centimeter to make it fit. Easily done because the PLA isn't that tough. There is a thread mentioned on the Thingiverse page that has different versions of this case posted. I liked this one the best because is was the smallest, but not without it's problems. Also make sure you have some small self-tapping screws to close the case with. I got my screws from a broken keyboard that I dismantled. Good luck!
Re: Show Us Your MiSTers
Posted: Wed Nov 03, 2021 9:55 pm
Did this very early lockdown
Re: Show Us Your MiSTers
Posted: Wed Nov 03, 2021 10:47 pm
Looks very nice
Re: Show Us Your MiSTers
Posted: Thu Nov 04, 2021 10:12 am
Hey,Jellybelly wrote: ↑Wed Aug 18, 2021 3:55 pm 3D Printed case, Not the final colour, and a few more tweeks to add (internal sata bay for HDD, vga and audio out), but works for me nicely at the moment, can post OpenSCAD files if anyone wants them and try to remember the BOM.... )
Love this case
Don’t suppose you have the BOM for the parts you used to put it all together please??
Many thanks